--- graphviz-2.20.2.orig/debian/README.source +++ graphviz-2.20.2/debian/README.source @@ -0,0 +1,46 @@ +Packaging graphviz for Debian +----------------------------- + + [ New upstream release ] + * Update the list of config scripts if needed. + + [ Patches ] + * Patch management: quilt is used, remember to run "autoreconf -vfi" with + automake1.10 installed, so as to produce the appropriate patch, stored as + the last patch of the series, 0_autoreconf_run. One shouldn't forget to + delete autom4te.cache directories before refreshing the patch. + * As of 2.14, there are no longer patches which imply an autoreconf run, so + this patch no longer exists. Anyway, upstream now uses automake1.10. + * The following prefix convention was originally used for patch names: + 0 - Debian-specific fix + 1 - Backported fix (followed by a 4-digit upstream bug number, if any) + 2 - Submitted fix (followed by a 4-digit upstream bug number, if any) + 3 - Not-yet submitted fix. + The frontier between 2 and 3 is no longer clear, since there was a lot of + patches sent upstream during the last weeks (may 2007), so 3_* patches + might have already been incorporated into upstream's CVS, and further + patches are likely to be sent upstream as soon as added to the package. + + [ Library handling ] + * dh_makeshlibs: the -V option is used to ensure that the versioned-Depends + on libgraphvizN is sufficient, so that one is sure that the config file + update mechanism is present. + + [ Plugins & config file ] + * They are/will be named libgraphvizN-*-plugin. + * They have to use this mechanism in post{inst,rm} scripts to ensure that + they are correctly registered. Copying the first stanza (about + libgraphvizN-dev-config-update) of libgraphvizN's postinst to both plugin's + postinst and postrm should be sufficient. + * Each libgraphvizN should take care of its own "configN" file (creation, + update, removal). In addition, "config" file should be removed (e.g. in + postinst), since it may have subsisted during 2.8 -> 2.12 migration. + * Care must be taken about the plugin files, they have to be excluded from + the libgraphvizN package (see libgraphvizN.install), that's why the content + of this latter package has to be listed in extenso, and that's why jokers + aren't used for some files (esp. under /usr/lib/graphviz). + * lib/gvc/gvconfig.c:gvconfig() is patched to use "configN" instead of + "config", so as to be able to have several library versions installed at + the same time, which is not possible with a common configuration file. + + -- Cyril Brulebois Sun, 22 Jun 2008 15:37:43 +0200 --- graphviz-2.20.2.orig/debian/changelog +++ graphviz-2.20.2/debian/changelog @@ -0,0 +1,1072 @@ +graphviz (2.20.2-3~bpo40+1) etch-backports; urgency=low + + * Backport for etch + * control: etch: downgrade to tcl/tk 8.4 [etch]. + * Build-dep: Downgrade to libgd2-noxpm-dev (>= 2.0.33) [etch]. + * rules/control: Disable libgv-python && --enable-python25 configure + option [build problems]. + * rules/control: Disable libgv-php5 [swig in etch]. + + -- Stephan Suerken Thu, 11 Dec 2008 17:47:44 +0100 + +graphviz (2.20.2-3) unstable; urgency=high + + * Backport patch to fix a stack overflow in the graph parser, reported + by IBM and fixed in 2.20.3. To avoid autotools noise, only the actual + fix is backported here, instead of pulling a brand new upstream + release (though functionally minimal). As usual, thanks to upstream + for their absolute kindness: + - debian/patches/20_fix_parser_stack_overflow + * Set “urgency=high” accordingly, after discussion with the security + team. + + -- Cyril Brulebois Sun, 12 Oct 2008 23:24:12 +0200 + +graphviz (2.20.2-2) unstable; urgency=low + + * Backport patch by Emden R. Gansner to fix a regression in tred, which + happened during the transition to cgraph (in 2.20.0), spotted by + Wouter Koolen-Wijkstra (Closes: #493494): + - debian/patches/10_fix_tred_regression + + -- Cyril Brulebois Sat, 16 Aug 2008 07:29:59 +0200 + +graphviz (2.20.2-1) unstable; urgency=low + + * New upstream bugfix release. + * debian/rules: + - Add “--without-gts” to configure arguments to make sure not to link + against GTS, at least for now. + - Add “--disable-r” since there's no need to build it for now, as it + isn't shipped anyway. + * debian/libgraphviz-dev.install: + - Add cgraph.3 manpage, forgotten in the previous upload. + * Fix the PHP bindings (Closes: #489964): + - Ship gv.php under /usr/share/php/libgv-php5. + - Ship gv.so under /usr/lib/php5//libgv-php5, instead of the + previous libgv_php.so. + - Ship a README.Debian in the libgv-php5 package explaining how to + use this extension. + - Update the 0_bindings_documentation patch to reflect that the + correct usage is include()ing the .php file, rather than dl()ing + the .so file. + * Update fonts dependencies since Times is now available in main, thanks + to Thijs Kinkhorst for the notice (Closes: #490043): + - Drop Suggests on msttcorefonts. + - Add Recommends on ttf-liberation. + + -- Cyril Brulebois Fri, 01 Aug 2008 04:04:54 +0200 + +graphviz (2.20.0-1) unstable; urgency=low + + * New upstream release. + * debian/patches/0_versioned_plugin_config_file: + - Refresh context. + * debian/patches/0_bindings_documentation: + - Refresh, drop some hunks merged upstream. + * debian/patches/0_tcl_manpages_section: + - Refresh. + * debian/patches/1_disable_lumping_all_include_directories: + - Drop, was backported from upstream. + * debian/patches/0_autoreconf_run: + - Drop, no longer needed. + * debian/libgraphviz4.lintian-overrides: + - Drop several-sonames-in-same-package, no longer reported. + - Update package-name-doesnt-match-sonames. + * debian/rules: + - Bump shlibs, new symbols. + - Call chrpath to strip the rpath on /usr/lib (at least on amd64), + but not the one on /usr/lib/graphviz (needed for a plugin at + least), and fail if there's an unknown RPATH, so that the + appropriate tweak can be added. + * debian/README.Debian-packaging: + - Rename into debian/README.source per Policy 3.8.0. + * debian/control: + - Add chrpath to Build-Depends. + - Add lua5.1 to Build-Depends, now needed for lua detection. + - Bump Standards-Version from 3.7.3 to 3.8.0 (one change, see above). + - Update my mail address. Thanks for their sponsorship to: + - Mohammed Adnène Trojette (adn), + - Alexander Sack, + - Kari Pahula, + - Ana Beatriz Guerrero Lopez, + - Paul Wise, + - Lucas Nussbaum, + - Pierre Habouzit, + with special thanks to Ana and Pierre who got poked more than the + others, and to Alexander who got me through NM. + + -- Cyril Brulebois Sun, 29 Jun 2008 17:24:08 +0200 + +graphviz (2.18-1) unstable; urgency=low + + * New upstream release: + - Move from Tcl/Tk 8.4 to 8.5. + - Now build python2.4 and python2.5 modules. + * debian/control: + - Replace tcl8.4-dev and tk8.4-dev with tcl8.5-dev and tk8.5-dev in + Build-Depends accordingly. + - Update the version in the long description of libgv-tcl. + - Add python2.5-dev to Build-Depends. + - Mention both versions in the long description of libgv-python. + - Drop libttf-dev from Build-Depends since that's a deprecated + package, replaced by libfreetype6-dev (which is already there), + thanks to Moritz Muehlenhoff for the notice (Closes: #473487). + * debian/libgv-tcl.install: + - Delete the entry about pkgIndex.tcl since it's now shipped under + the tcl directory. + * debian/libgv-python/install: + - Add “usr/lib/graphviz/python{24,25}”, later rearranged through + debian/rules. + * debian/pyversions: + - Add it, containing “2.4,2.5”. + * debian/rules: + - Pass an extra flag to configure: “--without-rsvg” to avoid an extra + plugin to be built, which would pull many other dependencies. A new + binary package might be introduced later, with both gtk and rsvg + plugins. + - Bump shlibs, new symbols. + - Use “pyversions -s” rather than “pyversions -d”. + - Use “--enable-python{24,25}” instead of just “--enable-python”. + - Install both python modules under appropriate site-packages + directories. + - Duplicate gv.py in both directories, then taken care of by + python-support. + - Get rid of tclpkg/gv/gv.R and tclpkg/gv/php_gv.h through dh_clean + to keep the diff clean. + * Drop workaround for FTBFS with gcc-4.3, fixed upstream: + - 2_workaround_ftbfs_with_gcc-4.3. + * Backport fix from CVS, preventing all include directories from being + lumped together, does causing python2.5 to be misbuilt (using + python2.4 includes). + - Add 1_disable_lumping_all_include_directories: Actual fix. + - Add 0_autoreconf_run: Needed since a Makefile.am is touched. + - Disable 0_libtool_linking_reorder_workaround: no longer applies + because of the autoreconf run. + + -- Cyril Brulebois Sat, 12 Apr 2008 02:11:00 +0200 + +graphviz (2.16.1-3) unstable; urgency=low + + * Add workaround for FTBFS with gcc-4.3 (Closes: #466810): + - 2_workaround_ftbfs_with_gcc-4.3. + * Update doc-base section: from “Apps/Graphics” to “Graphics”. + + -- Cyril Brulebois Wed, 26 Mar 2008 00:43:57 +0100 + +graphviz (2.16.1-2) unstable; urgency=low + + * Improved debian/copyright: + - Distinguish between copyright and license. + - Add copyright years and copyright holder (AT&T Corp.). + - Use “Copyright” and “©” instead of “(C)”. + + -- Cyril Brulebois Tue, 26 Feb 2008 14:33:24 +0100 + +graphviz (2.16.1-1) experimental; urgency=low + + * New upstream release: + - Fixes regressions in dotty (Closes: #461530). + * Replaced “-V” with “-V 'libgraphviz4 (>= 2.16)'” in the dh_makeshlibs + call since no shlibs bump is required for this new upstream release. + * Dropped patch (merged upstream): + - 2_ocaml_tweak. + - 0_autoreconf_run (it was only needed because of 2_ocaml_tweak). + * Refreshed patches: + - 0_versioned_plugin_config_file. + - 0_bindings_documentation. + * Moved sections, resolving override disparities: + - libgv-python: from interpreters to python. + - graphviz-dev: from graphics to devel. + * Now ship diffimg since it actually looks useful to at least someone, + thanks to David Liontooth for having requested it (Closes: #460595). + Done by reverting the diffimg deletion in “install” target. + * Adapted Tcl bindings: moved to a subdirectory of /usr/lib/tcltk to + comply with the Tcl/Tk policy. + * Adapted the manpage accordingly: in the “load” call, adjusted the + path to the shared object. + * Dropped NEWS.Debian since its content wasn't really what one would + expect when stumbling upon it, thanks to Steve Langasek for the + original comment. + * Refreshed README.Debian: + - Dropped the note about gpr->gvpr and colorize->gvcolor renames. + That was done long ago (graphviz 1.10). + - Dropped notices about: bindings, -dev, and -doc packages. + - Updated pointers to examples and contrib files (Closes: #459955). + - Added a note about diffimg now being shipped (see above). + - Kept notes about the suggested packages mostly as-is, they need an + update. + - Refreshed entry about graphviz.7 (included upstream). + - Included former NEWS.Debian's item about C# and Java bindings. + * Improved handling of libgraphvizN-config-update: + - Build it from perlpod: debian/libgraphviz-config-update.pod.in + (and delete generated files in the “clean” target). + - Use a placeholder to refresh the SONAME automatically. + - Dropped debian/libgraphviz4-config-update.1 accordingly. + * No longer ship any .la file. Remaining ones were shipped through + libgraphviz-dev and libgv-tcl. Reverse dependencies can still be built + from sources without any troubles, so this deletion sounds safe. + + -- Cyril Brulebois Thu, 21 Feb 2008 23:25:37 +0100 + +graphviz (2.16-3) unstable; urgency=low + + * Renamed libgraphviz4-dev to libgraphviz-dev since a single version is + supported at once: + - debian/control: + - Replaced libgraphviz4-dev with libgraphviz-dev. + - Added “Conflicts/Replaces: libgraphviz4-dev (<< 2.16-3)” to the + libgraphviz-dev package so that upgrades are possible for people + having installed the libgraphviz4-dev package from experimental. + - Added “Replaces: libgraphviz3-dev” at the same time. + - debian/rules: Removed $(SONAME) from libgraphviz$(SONAME)-dev. + - debian/libgraphviz4-dev.install -> debian/ libgraphviz-dev.install. + * Added “LDFLAGS="-Wl,--as-needed"” to the ./configure call so as to + avoid extra linking. It works for all binaries (/usr/bin/*) at least. + * Since the above isn't sufficient to get rid of extra linking in + libraries (because of libtool's bug #347650), the following patch + against config/ltmain.sh and libltdl/ltmain.sh has been added: + - 0_libtool_linking_reorder_workaround. + * Added “--without-ipsepcola” to ./configure to avoid FTBFS on arm. The + problem is due to a wrong linking of C++ code (since g++ isn't used + at the moment). Not that easy to fix (but being worked on), disabling + this feature for now. + * Nuke trailing whitespaces in various debian/* files. + * Order ./configure arguments, grouping them by category (build options, + general options, features, bindings). + * Switch to a build-time update of config.{guess,sub} scripts: + - Listed in $(CONFIG_SCRIPTS), to be updated on each new upstream + release (added to debian/README.Debian-packaging). + - Updated during the “configure” target, dh_clean'd during the + “clean” one. + - The Build-Depends on autotools-dev was there already. + * Deleted patch (no longer needed, see above): + - 0_autotools_config_files. + * Don't ship empty directories, by deleting /usr/lib/graphviz for php + and python bindings, rather than /usr/lib/graphviz/$LANGUAGE. + * Fixed ruby bindings, now that a policy draft exists: + - Ship the ruby module where it belongs (Closes: #454622). + - Updated patch (the RUBYLIB trick is no longer needed): + - 0_bindings_documentation. + - Added an explicit dependency on ruby1.8. + * Moved the build dependency from libgd2-xpm-dev to libgd2-noxpm-dev, + since this latter is sufficient, and since appropriate dependencies + are computed (libgd2-xpm | libgd2-noxpm). This allows for more + flexibility from a user point of view (Closes: #459537). Many thanks + to Ben Finney for the notice. The only change regarding the supported + features is that “xbm” is no longer supported in “loadimage” + according to the output of “dot -v”. + * Removed unneeded “Conflicts: graphviz (<< 2.12)” from libgv-ruby, + which got here when copying the libgv-tcl stanza. + * Bumped Standards-Version to 3.7.3 (no change needed). + * Added a copyright statement about the Debian packaging. + + -- Cyril Brulebois Wed, 09 Jan 2008 03:18:46 +0100 + +graphviz (2.16-2) experimental; urgency=low + + * Added patches: + - 2_ocaml_tweaks: + - Make the generation of native objects conditional since ocamlopt + isn't available on every arch. Upstream didn't include the + conditional statements when merging the submitted patch. This patch + adds an AM_CHECK_PROG on ocamlopt and conditionally adds the native + objects to OCAML_data when needed (Closes: Bug#451763). + - Also delete duplicates in the OCAML_data, while adding the missing + gv.cmo file. + - 0_autoreconf_run: Needed again since configure.ac and a Makefile.am are + touched. Only keep in there the changes to aclocal.m4, configure, and + all Makefile.in's. + * Dropped OCaml-related files (merged upstream) and adapted related + instructions in debian/rules: + - debian/ocaml/Makefile.ocaml + - debian/ocaml/META.gv + + -- Cyril Brulebois Mon, 19 Nov 2007 02:47:51 +0100 + +graphviz (2.16-1) experimental; urgency=low + + * New upstream release (Closes: #438420). + * Fixed regression in this new upstream release: + - Corrupted output creation for certain inputs (Closes: #432890). + * Fixed bug: + - Invalid EPS code creation (Closes: #397060). It was probably a bug in + 2.8, thus might be fixed in 2.12 already. This version closes it for + sure at least. Further explanations from upstream are available on the + bugreport. + * Refreshed patches: + - 0_autotools_config_files: Updated to autotools-dev/20070725.1. Added a + TODO item about moving this patch to a build-time update. + - 0_versioned_plugin_config_file: Drop the first hunk, which modified + cmd/dot/Makefile.am to not run “dot -c”. Upstream now has a better + way to detect the installation for packaging purposes (using DESTDIR). + - 0_bindings_documentation: Updated lua manpage from lua5.0 old style to + lua5.1, thanks to Enrico Tassi (Closes: #448365). + * Dropped patches: + - 3_manpages_fix: Merged upstream. + - 3_manpages_hyphen_fix: Merged upstream. + - 1_diffimg_Makefile.am_fix: Merged upstream. + - 1_lefty_fix: Merged upstream. + - 3_gnomeui_configure.ac_fix: Merged upstream. + - 3_ruby-bindings_configure.ac_fix: Merged upstream. + - 3_php5-bindings_configure.ac_fix: Merged upstream. + - 3_bindings_Makefile.am_fix: Merged upstream. + - 3_lua-bindings_configure.ac_fix: Merged upstream. + - 0_autoreconf_run: No longer needed, given the dropped patches. + * Added patch: + - 0_tcl_manpages_section: Upstream ships tcl-related manpages in “mann” + instead of “man3” and wants to keep it that way. This patch modifies + the headers so that they contain “3” instead of “n”. + * debian/rules: + - Use a SONAME variable to ease SONAME transitions. + - Remove the extra “rm” calls now that upstream's “make distclean” is + sufficient. + - Modify the manpage handling since upstream now installs *.n manpages + under usr/share/man/mann. Also adapted some *.install files to install + some additional manpages. + - Drop the parameter of the “-V” option in the “dh_makeshlibs” call, + since a dependency based on the upstream version number is sufficient + by now. + - Do not install the “diffimg” binary, see NEWS.Debian. + * debian/NEWS: + - Add a note about “diffimg”. + - Add a status update about the bindings, especially about the python + one. + * debian/libgraphvizN.install: + - Made SONAME-independant: only specifies the overrides directory, no + longer the filename. + * debian/README.Debian-packaging: + - Updated to match the autoreconf patch dropping, and document the needed + automake version in case this patch has to be added again. + * debian/graphviz.7: + - Dropped, merged upstream. + * SONAME 3 -> 4 transition (all files are in debian/): + - rules: + - Adjusted SONAME variable. + - Adjusted versioned dependency for the shlibs. + - libgraphviz3-config-update.1: + - libgraphviz3.install: + - libgraphviz3.lintian-overrides: + - libgraphviz3.postinst: + - libgraphviz3.postrm: + - Renamed with s/3/4/. + - libgraphviz4.lintian-overrides: + - Updated SONAME in each override. + - libgraphviz4.post{inst,rm}: + - Updated with s/3/4/. + - patches/0_versioned_plugin_config_file: + - Updated with s/config3/config4/. + - control: + - Adjusted libgv-ocaml long description, which mentions the + libgraphvizN-dev package. + * debian/libgraphviz4.lintian-overrides: + - In addition to the SONAME bump, deletion of “libexpr” since it is now + used a convenience library, and addition of “libcgraph”. + * debian/watch: + - Upstream now uses x.y.z and not only x.y, updated regex to catch + [0-9.]+\.tar\.gz (the development snapshots are in another directory). + * debian/control: + - Version the B-D on libgd2-xpm-dev (>= 2.0.35) to ensure the internal + code copy isn't used. + * NOT added support for the gdk-pixbuf renderer: + - It supports .bmp .ico .jpg .png .tif. + - debian/control would need an additional B-D on libgtk2.0-dev. + - debian/rules would need an additional “--with-gdk-pixbuf”. + - But that pulls gtk, which is far too much for what graphviz has to do. + - Therefore, added a “--without-gdk-pixbuf” to ensure it isn't built, + even if gdk-pixbuf development files are available. + + -- Cyril Brulebois Tue, 13 Nov 2007 00:50:12 +0100 + +graphviz (2.12-5) unstable; urgency=low + + * Modified bindings handling: + - tclpkg/gv/Makefile.am is now patched to set “-module -avoid-version” in + LDFLAGS. There are dynamically loadable modules rather than shared + libraries. + - Added patch for this: + - 3_bindings_module_avoid-version_options. + - Refreshed patch so as to refresh the appropriate Makefile.in (with only + an automake run): + - 0_autoreconf_run. + - There's still Tcl parts that are versioned. + * Fixed libgv-guile description, thanks to Kanru Chen (Closes: #439385). + * Fixed libgv-lua (Closes: #439525): + - After a discussion with Enrico Tassi, it has been decided to only build + against lua5.1, and not against both lua5.0 and lua5.1 as planned at + the beginning. Description updated to mention lua5.1 explicitely. + - debian/libgv-lua.install: Only mention the .so now (the .la's are + probably unneeded for bindings, they'll probably be amm dropped once + the tcl case has been sorted out). + - debian/rules: Some additional work is done to make it loadable + directly, and to document the used liblua version. + - Rename libgv_lua.so into liblua$(LUA_VERSION)-libgv.so. + - Add a symlink from /usr/lib/lua5.1/gv.so to the .so in /usr/lib. + - It looks like it is now usable directly with a single “require "gv"”. + - The documentation has still to be updated, though. + * Fixed libgv-ocaml: + - Rebuild against ocaml 3.10 (Closes: #441494). + - debian/control: Added a Suggests: on ocaml-base-nox to the -dev package + since it is needed for the OCaml development files, but not a stronger + relation since one will usually want to use the C headers. + - debian/control: Also added a Suggests: on ocaml-findlib to the -dev + package since it is suggested to use findlib to use the package (and + per pkg-ocaml-maint policy). + - debian/control: Modified long descriptions to detail the decision about + the OCaml binary packages. + - debian/rules: Moved the library to the stublibs directory of the + current ocaml version. Moved the devel files to the -dev package. + Drop the .la file and the now-empty /usr/lib/graphviz/ocaml directory. + - debian/ocaml/Makefile.ocaml: Add some instructions to build the missing + library files so that it is possible to actually load the gv library in + the interpreter. This file is copied into the source tree after the + usual build, and then use to build them. Its “clean” target is called + from debian/rules, and it gets removed before the usual “clean”. + - debian/ocaml/META.gv: Add META file used to handle OCaml dependencies. + * Improved libgv-python (Closes: #440829): + - debian/control: Added python-support to Build-Depends, python:Depends + to libgv-python's Depends. + - debian/rules: Added a call to dh_pysupport. Move to a site-packages + directory depending on the current default python version. + - Dropped the use of “-lpython”: + - Added patch: 3_python-bindings_configure.ac_fix. + - Refreshed patch: 0_autoreconf_run. + - Dropped .la file. + - Other points of the bugreports are already mentioned above. + * Other bindings (libgv-guile, libgv-perl, libgv-ruby): + - Dropped .la by specifying only the .so in their respective .install + file, instead of “*”. + * Adapted documentation: + - Lua: updated instructions (package.loadlib, new path). + - Python: one can now “import gv” directly. + - Refreshed patch: 0_bindings_documentation. + * debian/control: (thanks to dpkg 1.14.7) + - Rename XS-Vcs-* to Vcs-*. + - Move the Homepage from the description to the new header. + + -- Cyril Brulebois Tue, 23 Oct 2007 03:21:13 +0200 + +graphviz (2.12-4) unstable; urgency=low + + * Added bindings: + - guile (Closes: #360969); + - lua (Closes: #360971); + - ocaml (Closes: #360975); + - php5 (Closes: #360973); + - python (Closes: #360974); + - ruby (Closes: #360978). + * Added Build-Depends accordingly: + - guile-1.6-dev; + - liblua5.1-0-dev; + - ocaml-nox; + - php5-dev, php5-cli; + - python2.4-dev, python-minimal; + - ruby1.8-dev, ruby. + * Some patches are needed to enable some bindings: + - added 3_bindings_Makefile.am_fix, since some variables were missing; + - added 3_ruby-bindings_configure.ac_fix to force ``-lruby1.8'' instead + of ``-lruby'', which isn't working; + - added 3_lua-bindings_configure.ac_fix to detect lua correctly. + - added 3_php5-bindings_configure.ac_fix to fix include paths (basically, + it does s/php/php5/g on this line). Maybe php5-cli might be unneeded, + if the detection of the php binary is turned off (it looks like + unneeded). + * Added a variable (control, rules) for ocaml, so that the Depends: is set + on the correct ocaml-base-nox-${F:OCamlABI} package. + * Binding manpages are shipped as gv_*.3, after some modifications to the + upstream templates, stored in the 0_bindings_documentation patch. + * Enabled diffimg: + - modified 0_disable_diffimg to only modify contrib/Makefile.am, since + now an autoconf/automake round is needed, due to the modifications to + configure.ac et al. This way it can be pop'd. + - renamed into 1_diffimg_Makefile.am_fix, since diffimg is now built, + thanks to a slight modification to the Makefile.am: there was an + erroneous condition on WITH_LIBGD, instead of WITH_MYLIBGD (this is + fixed in CVS). + * Added README.Debian-packaging to document some packaging howtos (at the + moment, what should be done to get the last patch: autoreconf run). + * Refreshed 0_autotools_config_files to patch config.{guess,sub} in the + following directories, with files from autotools-dev_20070306.1: + - config + - lib/gd/config + - libltdl + * Added 1_lefty_fix, which is a backport of a regression (2.8 -> 2.12) fix + for lefty, thanks to Sune Vuorela for reporting, and to Emden R. Gansner + for the patch. + * Adjusted clean target in debian/rules to clean appropriately. + * Added the -V 'libgraphviz3 (>= 2.12-3)' parameter to the dh_makeshlibs + call so that the appropriate library version is depended on, avoiding the + hardcoded values in the control file, and the duplicates in the Depends: + fields after substitution. Now ${shlibs:Depends} is used instead, almost + everywhere. libgraphviz3-dev still has hardcoded dependencies, see + TODO.Debian. Also turned ``-a'' into ``-plibgraphviz3'' since it is the + only package needing an shlibs file and ldconfig calls in post{inst,rm} + scripts. + * Added installation of /usr/bin/dot under /usr/sbin in the libgraphviz3 + package, so that it can be called when needed, during libgraphviz3 or + libgraphviz3-*-plugin installation or removal. Added a call to ``mv'' in + debian/rules to rename it to libgraphviz3-config-update since dh_install + doesn't allow renaming. + * Changed 0_test_fix into 0_versioned_plugin_config_file: + - Former patch needed so that no ``dot -c'' is run at build time. + - Adjusted configuration file accordingly, by patching + lib/gvc/gvconfig.c, using "config3" instead of "config". + * Added ``--list-missing'' option to dh_install, so that files not installed + are spotted easily. + * Maintainer scripts, plugin configuration file: + - Dropped debian/postinst and debian/postrm, the configuration + (``dot -c'') of the plugins is now handled as documented in + through libgraphviz3(|*-plugin).{postinst,postrm}, as documented in + README.Debian-packaging. + - Added a check and a removal-when-needed for the ancient "config" file. + - Added a manpage accordingly. + * Fixed some hyphens in Debian-specific manpages. + * Fixed broken links in index.html by not compressing PDF files (``-X.pdf'' + added to the ``dh_compress -i'' call), since they are in a separate + package, there's not much space loss, and it makes users' life easier + (Closes: #378522). + * Adapted lintian overrides since the output changed (SONAMES are now + sorted, see #428681, fixed in lintian 1.23.32). + * Fixed pango plugin misconfiguration, due to some autotools blackmagic. Now + that ./configure and the like are regenerated, everything seems to be + fine (Closes: #424883, #422859). Please also note that the upstream + graphviz-cairo package is now superseded by the graphviz package. + * Added missing -dev packages to the Depends: of the libgraphviz3-dev + package, in particular libexpat1-dev (libfreetype6-dev seems to be no + longer needed), using d-devlibdeps from the d-shlibs package. Build + dependency added accordingly (Closes: #404384). + * Set the Maintainer field to myself. + * Do not ignore ``make distclean'' errors. + * Added XS-Vcs-Git and XS-Vcs-Browser fields in debian/control. + * Moved ``Apps/Graphics'' to ``Applications/Graphics'' for the menu + transition. + + -- Cyril Brulebois Thu, 09 Aug 2007 16:25:51 +0200 + +graphviz (2.12-3) unstable; urgency=low + + * Re-enable lefty, which was a leftover during the 2.8 -> 2.12 upgrade: + - turned back configure's --without-x to --with-x; + - adjusted graphviz.install to install *.lefty under + /usr/share/graphviz/lefty + (Closes: #423541). + + -- Cyril Brulebois Sun, 13 May 2007 21:20:24 +0200 + +graphviz (2.12-2) unstable; urgency=low + + * Fixed gnomeui + pango/cairo pulling: (Closes: #422862, #422873) + - added 3_gnomeui_configure_fix patch: adds support in configure.ac + for --with(out)-gnomeui, so that it can be used to disable the link + against gnomeui libraries even if they are found; + - added configure_autoconf_rerun: contains the modifications to configure + after autoconf has been rerun; + - added --without-gnomeui and --without-pangocairo in debian/rules + accordingly; + - added --without-gtk as well, and turned --with-x into --without-x + since the associated shared objects weren't built anyway. + * The associated features might be added in separate package(s) later. + + -- Cyril Brulebois Tue, 08 May 2007 17:16:29 +0200 + +graphviz (2.12-1) unstable; urgency=low + + * New upstream release. + Hopefully it addresses the longstanding rpath issue, since all public + libraries now belongs to /usr/lib (Closes: #312532, #343476, #360968). + The problem of language bindings will be addressed in further uploads. + * Maintainer upload. + - Added myself in the Uploaders field. + * ACK previous NMUs: many thanks for having taken care of graphviz when + needed. + - Margarita Manterola (no NMU diff in the BTS); + - Steinar H. Gunderson (Closes: #375024, #389396); + - and my own NMUs (Closes: #399212, #400161). + + [debian/patches] + * Disabled no longer needed backported patches: + - 10000_lua_python_bindings; + - 10918_nop_fix. + * Disabled the build of the contrib `diffimg' tool since it looks like + there's a missing .la file: + - 0_disable_diffimg. + * Added a patch to handle minus vs hyphen signs in the manpages: + - 3_manpages_hyphen_fix. + + [debian/control] + * Made the package binNMU safe by switching from `${Source-Version}' to + `{binary:Version}'. + * Resplitted packaging into graphviz, libgraphvizN, libgraphvizN-dev, + graphviz-doc, where N matches the SONAME, currently 3. + * Additional packages also count the following bindings: libgv-perl and + libgv-tcl, which were included in the monolithic graphviz package before. + The transition should be quite smooth this way. The bindings package will + be named libgv-* so as to avoid name clashing with e.g. libgraphviz-perl, + which is a pure perl package. It also reflects the name of the bindings + (shared objects). The dependencies have still to be polished, that is + listed in TODO(.Debian). + - Perl's "gv" has been moved under /usr/lib/perl5, according to the + Debian Perl Policy, and this module is loadable without the additional + `use lib' line, which can be kept though because: + 1) it is harmless; + 2) it should ensure compatibility with default upstream installation + paths. + - Tcl files are kept under /usr/lib/graphviz/tcl, as in the previous + packages. When loading it through the "load" instruction specified in + the manpage, everything's alright. But if it is loaded using the + following, an error is displayed, although apparently harmless: + % package require Tcldot + Error: invalid api in config: libgvplugin_usershape_gd.so.2 usershape + 2.12 + It can happen when an older graphviz package hasn't been purged, so + that an older config file is still present under /usr/lib/graphviz. + * Not added a conflict between libgraphviz3 and former versions of graphviz, + since there is no file overlapping, with both SONAME bump and package + resplit (in particular thanks to the binding packages). + * Added a conflict between new graphviz-doc and older graphviz, since + documentation and examples are now in graphviz-doc. + * Added a transitional graphviz-dev package to ensure a smooth upgrade from + graphviz-dev to libgraphviz3-dev. + * Adjusted all the descriptions, and the sections the packages belong to. + + [debian/rules] + * Revamped the install target of the debian Makefile to use dh_install and + *.install files instead of dh_movefiles and *.{dirs,files}. These + *.install files have been adjusted to be as clean as possible. Some files + (documentation, examples) present in the previous packages might now be + missing, but it is already known, see the updated TODO(.Debian) file. + * Turned the dh_shlibdeps call into a normal call w/o rpath since upstream + now ships under /usr/lib and no longer under /usr/lib/graphviz. + * Deleted the `-n' option of `dh_makeshlibs' so that the needed `ldconfig' + calls are added in the maintainer scripts. + * Added an override for libgraphviz3 since we are aware of the multiple + share objects, and since lintian signals that all have `3' as SONAME, + which is considered an error... + * Renamed menu to graphviz.menu to ensure it gets installed properly. + * Changed the ``make install'' to using ``DESTDIR='' instead of ``prefix='', + thanks to Alexander Sack. + * Added dh_perl calls, to be able to use ${perl:Depends} in the control + file, even though no dependency is added for now. + + -- Cyril Brulebois Thu, 16 Apr 2007 16:45:34 +0200 + +graphviz (2.8-2.6) unstable; urgency=low + + * Non-maintainer upload. + * Moved groff-base and gs-common from Build-Depends-Indep to Build-Depends. + Fixes FTBFS when building binary-arch only. + + -- Cyril Brulebois Fri, 8 Dec 2006 11:47:06 +0000 + +graphviz (2.8-2.5) unstable; urgency=low + + * Non-maintainer upload. + * Switched to the quilt system to keep the patches readable and handy. As a + convention, the following prefixes are used: + 0 - Debian-specific fix + 1 - Backported fix (followed by a 4-digit upstream bug number) + 2 - Submitted fix (followed by a 4-digit upstream bug number) + 3 - Not-yet submitted fix + Patches already present: + - 0_autotools_config_files: + Adds config.{guess,sub} from /usr/share/misc (from the autotools-dev + package). debian/rules adjusted accordingly so that it doesn't + refresh them. The autotools-dev B-D could probably be dropped. + - 0_test_fix: + Fixes an error during the build due to the fact that the installation + is not done directly into the system but on a subdirectory. + - 10000_lua_python_bindings: + Backport from upstream modification into configure.ac, patch + generated after having run `autoconf'. + - 10918_nop_fix: + Backport introduced in 2.8-2.4. + - 3_manpages_fix: + See the next two items. + * Added a patch to fix some warnings in the manpages (Closes: #381063). + * Added a graphviz.7 manpage and a reference to it in README.Debian. + Thanks to Joachim Berdal Haga for the documentation + effort this manpage is based on (Closes: #389105). + * Updated debian/rules to use dh_installman to handle manpages. + * Modified debian/graphviz.dirs so that the build is less vulnerable to + behaviour modifications of core utils (Closes: #376049). + Thanks to Florent Bayle for the patch. + * Updated URL in debian/control (Closes: #377691). + * Improved descriptions in debian/control. + * Removed the erroneous trailing backslash in debian/graphviz-doc.doc-base. + * Bumped Standards-Version from 3.6.2 to 3.7.2 (no change needed). + * Bumped debhelper compatibility from 4 to 5 (no change needed). + + -- Cyril Brulebois Mon, 20 Nov 2006 04:46:07 +0000 + +graphviz (2.8-2.4) unstable; urgency=low + + * Non-maintainer upload. + * Fixed totally broken `nop' utility by applying a patch backported from the + 2.9 version, fixing the linking against a wrong library. Since the current + packaging doesn't provide any means of keeping patches separate, the files + cmd/tools/Makefile.{am,in} are patched directly, using the patch submitted + in the BTS (closes: #359870). + + -- Cyril Brulebois Fri, 17 Nov 2006 21:05:35 +0100 + +graphviz (2.8-2.3) unstable; urgency=medium + + * Non-maintainer upload. + * Tell configure not to build language packages we don't distribute; fixes + FTBFS when libruby1.8-dev is installed. (Closes: #388056) + + -- Steinar H. Gunderson Mon, 25 Sep 2006 15:16:12 +0200 + +graphviz (2.8-2.2) unstable; urgency=medium + + * NMU to fix a Failure To Build From Source due to a missing dependency on + liblua50-dev. (Closes: #377694). + * Fixed debian/rules so that the .diff.gz is cleaner. (Closes: #373256) + + -- Margarita Manterola Tue, 18 Jul 2006 15:27:49 -0300 + +graphviz (2.8-2.1) unstable; urgency=high + + * Non-maintainer upload. + * When moving the demo tree into /usr/share/doc/graphviz/examples, don't + try to move demo/pathplan_data/* after demo/*, since the latter includes + the former anyhow; fixes FTBFS. (Closes: #373254) + + -- Steinar H. Gunderson Thu, 22 Jun 2006 21:27:26 +0200 + +graphviz (2.8-2) unstable; urgency=low + + * Awaken Tcl parts missed in 2.8-1 package + * Apply patch from upstream enabling python I/F to build on 64bit machines + * Apply patch from upstream adding warn when python won't be built + * Ensure all index.html links work again (Closes: Bug#298463) + * Move -doc package to arch-all from any (Closes: Bug#360967) + * Ensure libs exist for symlinks (Closes: Bug#361444) + * Ensure graphviz plugins exist (Closes: Bug#359998) + * v2.8 fixes segfault (Closes: Bug#292635) + + -- Stephen M Moraco Sat, 8 Apr 2006 17:04:15 -0600 + +graphviz (2.8-1) unstable; urgency=low + + * Accept NM contributions from Dirk, Thanks! (Closes: Bug#320813) + * The NMUs fix: (Closes: Bug#359808, #360049, #359903, #359622) + and (Closes: Bug#359312, #360207) + * This upstream release closes many bugs. (Closes: Bug#332205) + and (Closes: Bug#332204, #332203, #332202, #332201, #335175, #344256) + and (Closes: Bug#312596, #321128, #305375, #298133) + * Add gsfonts to suggested packages list. This is normally already installed + with X but when using graphviz w/o X then we need this package for the + default fonts (Closes: Bug#353050) + * Moved files to proper pkgconfig directory (Closes: Bug#313508) + + -- Stephen M Moraco Sat, 1 Apr 2006 16:12:12 -0700 + +graphviz (2.8-0.4) unstable; urgency=low + + * NMU, coordinating with the maintainer + * debian/control: At last added libltdl3-dev to Build-Depends which + should have happened in revision 2.8-0.2 (Closes: #359903, #360049) + * debian/rules: Give dh_shlibdeps an explicit -l target + * debian/rules: Add -n to dh_mkshlibs call to not modify post{inst,rm} + * debian/control: Increase Standards-Version: to 3.6.2 + + -- Dirk Eddelbuettel Thu, 30 Mar 2006 20:04:06 -0600 + +graphviz (2.8-0.3) unstable; urgency=low + + * NMU, coordinating with the maintainer + + * debian/postinst: Call 'dot -c' to pre-seed configuration. This is + typically done at build-time via the upstream Makefile, but cannot be + used for a Debian build (yet, at least). Running it in the postinst + is a close enough approximation. (Closes: #359312, #359622, #359808) + + -- Dirk Eddelbuettel Wed, 29 Mar 2006 17:53:20 -0600 + +graphviz (2.8-0.2) unstable; urgency=low + + * NMU + * debian/rules: Remove /usr/lib/libltdl.* and /usr/include/ltdl.h + * debian/control: Add Depends: libltdl3-dev to graphiviz-dev + + -- Dirk Eddelbuettel Sat, 25 Mar 2006 22:35:51 -0600 + +graphviz (2.8-0.1) unstable; urgency=low + + * NMU + * New upstream release (Closes: #320813) + + * cmd/doc/Makefile.{in,am}: Comment out 'doc -c' in install-exec-hook + as shared libs cannot be resolved right after build + + * debian/rules: Set DH_COMPAT=4 + * debian/rules: As the upstream change a few things since the last Debian + new build of a new major release a year ago, chose to commented out a + large section of postprocessing and cleaning following make install + * debian/rules: Added removal of dot_static and extra COPYING (lintian) + + -- Dirk Eddelbuettel Sat, 25 Mar 2006 17:05:35 -0600 + +graphviz (2.2.1-1sarge1) stable-security; urgency=high + + * Non-maintainer upload by the Security Team + * Applied upstream patch to fix insecure temporary file creation + [dotty/dotty.lefty, CAN-2005-2965] + + -- Martin Schulze Fri, 30 Sep 2005 14:00:46 +0200 + +graphviz (2.2.1-1) unstable; urgency=low + + * New Upstream Version + * Fix Suggests missing comma (Closes: Bug#301216) + * Comma-fix allows suggests to work (Closes: Bug#303248) + * Added menu items for dotty,lefty (Closes: Bug#297238) + + -- Stephen M Moraco Sun, 10 Apr 2005 23:58:56 -0600 + +graphviz (2.2-2) unstable; urgency=low + + * Fix -doc depend (Closes: Bug#292428) + + -- Stephen M Moraco Mon, 7 Feb 2005 22:42:28 -0700 + +graphviz (2.2-1) unstable; urgency=low + + * New Upstream Version + * Moving from non-free to main. Yeay! + License is now cpl-1.0 (Closes: Bug#290112) + * Fixed doc-base files, now simply using top-level index (Closes: Bug#285642) + * Fixed neato: die with SIGFPE 8 on simple graph (Closes: Bug#270492) + * Fixed neato: fixes for abnormal term. cases (Closes: Bug#212192) + * Fixed dotty: fixes segfault on mouse wheel movement (Closes: Bug#178938) + * Fixed dotty: mouse/numlock interaction (Closes: Bug#268132) + * Fixed dot: SVG output corruption (Closes: Bug#278176) + * Fixed dot: manpage/doc updated (Closes: Bug#249589) + + -- Stephen M Moraco Wed, 19 Jan 2005 20:56:43 -0700 + +graphviz (1.16-1) unstable; urgency=low + + * New Upstream + + -- Stephen M Moraco Mon, 1 Nov 2004 21:00:59 -0700 + +graphviz (1.14-1) unstable; urgency=low + + * New Upstream Version + + -- Stephen M Moraco Mon, 30 Aug 2004 19:29:30 -0600 + +graphviz (1.12-3) unstable; urgency=low + + * Fix -dev section + * Cleanup copyright file (Closes: Bug#268565) + + -- Stephen M Moraco Sat, 28 Aug 2004 17:41:35 -0600 + +graphviz (1.12-2) unstable; urgency=low + + * Adopt NMU... (Closes: Bug#241124, Bug#255982) Thanks Dirk! + * Split stuff supporting build to -dev package (Closes: Bug#212682) + -- this treats differently the work done in 1.12-1 + * debian/control: Added Suggests for "msttcorefonts" for + Times font (Closes: Bug#239486). If writing .png files then you + may find that you want the Times font as suggested by this bug. + NOTE: if there is a better package for the Times font, please let + me know. + * debian/control: Backoff Standards-Version to 3.6.1 + + -- Stephen M Moraco Tue, 17 Aug 2004 13:25:47 -0600 + +graphviz (1.12-1) unstable; urgency=low + + * Non-maintainer hijacking and new upstream upload + * This package _really_ needs a new maintainer (see #255982) + * New upstream version (Closes: #241124) + -- this potentially closes a few of the open bugs on functionality + -- could someone please volunteer and check this ? + * debian/rules: do not remove include files so that other packages + can actually build against graphviz (Closes: #212682) -- though + #212682 also calls for an explicit libgraphviz package. + * debian/rules: do not muck around among the freshly built libraries + + * debian/control: Updated Build-Depends: "libjpeg62-dev, libpng12-dev, + libxaw7-dev" instead of unversioned "libjpeg-dev, libpng-dev, libxaw-dev" + * debian/control: Added Build-Depends "libttf-dev" for Freetype + * debian/control: Added Build-Depends "libexpat1-dev" for Expat + * debian/changelog: Remove obsolete emacs mode variable + * debian/control: Updated Standards-Version to 3.6.1.1 + + -- Dirk Eddelbuettel Mon, 26 Jul 2004 20:59:06 -0500 + +graphviz (1.10.20030915.0415-2) unstable; urgency=low + + * Fix embedded path to lefty libs (Closes: Bug#211443) + + -- Stephen M Moraco Wed, 17 Sep 2003 20:56:33 -0600 + +graphviz (1.10.20030915.0415-1) unstable; urgency=low + + * New Upstream Version (Closes: Bug#204457) + * Fixes dot -Tfig when '>' used in names (Closes: Bug#167890) + * Fixes font finding algorithm (Closes: Bug#193560) + * Unable to recreate non-end of neato with this version (Closes: Bug#197059) + * Unable to recreate TclDot rendergd failure this version (Closes: Bug#203208) + * This is official 1.10 plus fixes specifically for Debian reported issues + (generated by graphviz team): new manpage, tool renames, Makefile fixes + * Update per debhelper best practice changes + * Adjust Depends (Closes: Bug#195223, Bug#194433, Bug#200694) + * Update Policy Version + + -- Stephen M Moraco Mon, 15 Sep 2003 20:40:22 -0600 + +graphviz (1.8.9-1) unstable; urgency=low + + * Update to latest policy version + * New Upstream Version (Closes: Bug#147424, Bug#157980, Bug#148457) + + -- Stephen M Moraco Sat, 21 Sep 2002 15:21:06 -0600 + +graphviz (1.8.5-2) unstable; urgency=low + + * Fix doc-base links, add missing doc (Closes: Bug#149647) + * Apply missing bracket fix (to ihi script in examples), Bug148457 is marked + as fixed but stays open awaiting upstream fix + + -- Stephen M Moraco Thu, 4 Jul 2002 12:02:22 -0600 + +graphviz (1.8.5-1) unstable; urgency=low + + * New upstram version (Closes: Bug#138425) + + -- Stephen M Moraco Tue, 16 Apr 2002 23:09:06 -0600 + +graphviz (1.7.16-2) unstable; urgency=low + + * Rename gpr(1) to gvgpr and fix refs to it. (Closes: Bug#132543) + * Head off next bug by renaming colorize to gvcolorize (before the + overlap is discovered and reported ;-) + + -- Stephen M Moraco Tue, 5 Feb 2002 18:52:12 -0700 + +graphviz (1.7.16-1) unstable; urgency=low + + * New upstream version (Closes: Bug#127118) + * Add autoupdate of config.sub, config.guess + * Questionable postscript output appears fixed (Closes: Bug#128648) + * Update to latest policy version + + -- Stephen M Moraco Sat, 2 Feb 2002 00:58:13 -0700 + +graphviz (1.7.5-7) unstable; urgency=low + + * Fixup build-depends (Closes: Bug#101331) + + -- Stephen M Moraco Mon, 25 Jun 2001 21:11:40 -0600 + +graphviz (1.7.5-6) unstable; urgency=low + + * Fix path in lefty / remove LEFTYPATH overrides from lneato/dotty + + -- Stephen M Moraco Fri, 20 Apr 2001 08:48:49 -0600 + +graphviz (1.7.5-5) unstable; urgency=low + + * Now fix searchpath in lefty binary (2nd attempt on 94373) + first attempt fixed all but lefty binary + + -- Stephen M Moraco Fri, 20 Apr 2001 03:01:45 -0600 + +graphviz (1.7.5-4) unstable; urgency=low + + * Correct LEFTY library paths (Closes: Bug#94373) + + -- Stephen M Moraco Wed, 18 Apr 2001 10:02:19 -0600 + +graphviz (1.7.5-3) unstable; urgency=low + + * Build against newer libs (Closes: Bug#91466) + + -- Stephen M Moraco Mon, 26 Mar 2001 15:00:24 -0700 + +graphviz (1.7.5-2) unstable; urgency=low + + * Fix man3 removal cmds (didn't work first time...) + + -- Stephen M Moraco Sun, 25 Mar 2001 18:50:58 -0700 + +graphviz (1.7.5-1) unstable; urgency=low + + * Remove man3 pages as they are not for end-user and conflict with blt-dev + * Convert to use freetype6 and remove xaw3dg build-dep (Closes: Bug#90378) + * Add Conflicts: with gdtclft pkg (Closes: Bug#90544) + NOTE: this may not be final solution. 90378 proposes alternatives, + still negotiating + * Directories verified, close fixed-by-NMU (Closes: Bug#76025) + * Lefty.psp verified, close fixed-by-NMU (Closes: Bug#78511) + * Is latest upstream, close fixed-by-NMU (Closes: Bug#89387) + * Delivered HTML for otherwise missing section-n man-pages. + * Registered all docs with dwww, dhelp via doc-base mech. + + -- Stephen M Moraco Wed, 21 Mar 2001 20:48:01 -0700 + +graphviz (1.7.5-0.3) unstable; urgency=low + + * See README.Debian for issues and work remaining + * tkspline lib now present (Closes: Bug#76030) + * New version uses installed libs vs. had own (Closes: Bug#66941) + * Adjust to new maintainer address + (Thanks Torsten for handling things during my absence) + + -- Stephen M Moraco Mon, 19 Mar 2001 08:37:46 -0700 + +graphviz (1.7.5-0.2) unstable; urgency=low + + * NMU + * this and the last NMU closes: #78511, #76025 + * fixed some lintian warnings and errors + * fixed Depends and Build-Depends (partially) + + -- Torsten Werner Sun, 18 Mar 2001 14:40:33 +0100 + +graphviz (1.7.5-0.1) unstable; urgency=low + + * NMU + * new upstream, closes: #89387 + + -- Torsten Werner Sun, 18 Mar 2001 02:22:08 +0100 + +graphviz (1.5-3) unstable; urgency=low + + * restore to non-free location + + -- Stephen M. Moraco Wed, 19 Jul 2000 15:29:42 -0600 + +graphviz (1.5-2) unstable; urgency=low + + * removed manpages that overlap with real package (this is only partial + solution called for in #66941. I'll finish the conversion in next + upload.) + * tcldot.1 manpage should really be a tcldot.n - need to figure out what's + correct for Debian and correct, if need be, in next upload + * added Build-Depends to source package + * adjusted text in tcldot.1 to show accuate syntax for shell script + -- (missing required back-slash) + * adjusted build of dotty/lneato to build-in default lefty path + * removed man3 pages (may appear later in -dev) + * converted makes to build w/ -fPIC for .so use + * add rest of system to package (Closes: #63520, #63685) + -- new /usr/lib/lefty & Tcldot... subtrees + -- corrected mod-bits in examples tree (per lintian) + * fixed URL in copyright file (Closes: #66020) + + -- Stephen M. Moraco Wed, 19 Jul 2000 15:29:07 -0600 + +graphviz (1.5-1) unstable; urgency=low + + * Initial Release. + + -- Stephen M. Moraco Fri, 31 Dec 1999 15:37:17 -0700 + + --- graphviz-2.20.2.orig/debian/graphviz-doc.doc-base +++ graphviz-2.20.2/debian/graphviz-doc.doc-base @@ -0,0 +1,11 @@ +Document: graphviz-index +Title: Graphviz - Documentation Index +Author: The Graphviz Team +Abstract: Graphviz is a suite of graph drawing tools. This document provides + a single index to all the graphviz related documentation. +Section: Graphics + +Format: HTML +Index: /usr/share/doc/graphviz/html/index.html +Files: /usr/share/doc/graphviz/html/*.html + /usr/share/doc/graphviz/html/info/* --- graphviz-2.20.2.orig/debian/control +++ graphviz-2.20.2/debian/control @@ -0,0 +1,157 @@ +Source: graphviz +Section: graphics +Priority: optional +Maintainer: Cyril Brulebois +Standards-Version: 3.8.0 +Build-Depends: tk8.4-dev, tcl8.4-dev, debhelper (>= 5), libfreetype6-dev, zlib1g-dev, libjpeg62-dev, libpng12-dev, libxaw7-dev, bison, flex, autotools-dev, pdksh, libexpat1-dev, libfontconfig1-dev, libltdl3-dev, swig, libperl-dev, libgd2-noxpm-dev (>= 2.0.33), quilt (>= 0.40), groff-base, gs-common, lua5.1, liblua5.1-0-dev, ruby, ruby1.8-dev, php5-dev, php5-cli, ocaml-nox, python2.4-dev, python2.5-dev, python-minimal, libcairo2-dev, libpango1.0-dev, guile-1.6-dev, d-shlibs, python-support, chrpath +Vcs-Git: git://git.debian.org/git/collab-maint/graphviz.git +Vcs-Browser: http://git.debian.org/?p=collab-maint/graphviz.git +Homepage: http://www.graphviz.org/ + +Package: graphviz +Architecture: any +Depends: ${shlibs:Depends} +Conflicts: gdtclft +Recommends: ttf-liberation +Suggests: gsfonts, graphviz-doc +Description: rich set of graph drawing tools + Graph drawing addresses the problem of visualizing structural information + by constructing geometric representations of abstract graphs and networks. + Automatic generation of graph drawings has important applications in key + technologies such as database design, software engineering, VLSI and + network design and visual interfaces in other domains. Situations where + these tools might be particularly useful include: + . + * you would like to restructure a program and first need to understand + the relationships between its types, procedures, and source files + * you need to find the bottlenecks in an Internet backbone - not only + individual links, but their relationships + * you're debugging a protocol or microarchitecture represented as a + finite state machine and need to figure out how a certain + error state arises + * you would like to browse a database schema, knowledge base, or + distributed program represented graphically + * you would like to see an overview of a collection of linked documents + * you would like to discover patterns and communities of interest in a + database of telephone calls or e-mail messages + . + This package contains the command-line tools. + +Package: libgv-guile +Architecture: any +Section: interpreters +Depends: ${shlibs:Depends} +Description: Guile bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the guile (1.6) bindings. + +Package: libgv-lua +Architecture: any +Section: interpreters +Depends: ${shlibs:Depends} +Description: Lua bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the lua5.1 bindings. + +Package: libgv-ocaml +Architecture: any +Section: libs +Depends: ocaml-base-nox-${F:OCamlABI}, ${shlibs:Depends} +Description: OCaml bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the OCaml bindings. The associated development files + are in the libgraphviz-dev package so as to limit the number of binary + packages. + +Package: libgv-perl +Architecture: any +Section: perl +Depends: ${perl:Depends}, ${shlibs:Depends} +Conflicts: graphviz (<< 2.12-1) +Description: Perl bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the Perl bindings. + +Package: libgv-ruby +Architecture: any +Section: interpreters +Depends: ${shlibs:Depends}, ruby1.8 +Description: Ruby bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the Ruby (1.8) bindings. + +Package: libgv-tcl +Architecture: any +Section: interpreters +Depends: ${shlibs:Depends} +Conflicts: graphviz (<< 2.12-1) +Description: Tcl bindings for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the Tcl (8.4) bindings. + +Package: libgraphviz4 +Architecture: any +Section: libs +Depends: ${shlibs:Depends} +Description: rich set of graph drawing tools + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package contains the libraries. + +Package: libgraphviz-dev +Architecture: any +Section: libdevel +Depends: libgraphviz4 (= ${binary:Version}), ${devlibs:Depends} +Suggests: ocaml-base-nox-${F:OCamlABI}, ocaml-findlib +Conflicts: graphviz-dev (<< 2.12-1), libgraphviz3-dev, libgraphviz4-dev (<< 2.16-3) +Replaces: libgraphviz3-dev, libgraphviz4-dev (<< 2.16-3) +Provides: graphviz-dev +Description: graphviz libs and headers against which to build applications + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package installs the libraries and headers necessary to link graphviz + library routines into an application. It also installs additional man pages. + . + This package also contains the OCaml development files. + . + Note: A graphviz user doesn't need to install this package. + +Package: graphviz-doc +Architecture: all +Section: doc +Conflicts: graphviz (<< 2.12-1) +Suggests: graphviz +Description: additional documentation for graphviz + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package installs HTML and PDF documentation for Graphviz, as well as + examples. + +Package: graphviz-dev +Architecture: all +Section: devel +Depends: libgraphviz-dev +Description: transitional package for graphviz-dev rename + Graphviz is a set of graph drawing tools. See the description of the graphviz + package for a full description. + . + This package is targeted at easing the upgrade from older graphviz-dev to the + new libgraphviz-dev package. + . + This package can be purged at anytime once the libgraphviz-dev package has + been installed. --- graphviz-2.20.2.orig/debian/libgv-ruby.install +++ graphviz-2.20.2/debian/libgv-ruby.install @@ -0,0 +1,2 @@ +usr/lib/graphviz/ruby/libgv_ruby.so +usr/share/man/man3/gv_ruby.3 --- graphviz-2.20.2.orig/debian/rules +++ graphviz-2.20.2/debian/rules @@ -0,0 +1,245 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +include /usr/share/quilt/quilt.make + +# Get build platform info +export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + +UPSTREAM_VERSION = $(shell dpkg-parsechangelog | perl -ne 'print $$1 if /^Version: (.*?)-(.*)$$/') +SONAME = 4 + +OCAMLABI = $(shell ocamlc -version) +OCAML_PACKAGE = $(CURDIR)/debian/libgv-ocaml + +PHP_EXTENSION_DIR = $(shell php-config5 --extension-dir) +PHP_PACKAGE = $(CURDIR)/debian/libgv-php5 + +LUA_VERSION = 5.1 +LUA_PACKAGE = $(CURDIR)/debian/libgv-lua + +DEV_PACKAGE = $(CURDIR)/debian/libgraphviz-dev + +PYTHON_VERSIONS = $(shell pyversions -s) +PYTHON_PACKAGE = $(CURDIR)/debian/libgv-python + +RUBY_VERSION = 1.8 +RUBY_PACKAGE = $(CURDIR)/debian/libgv-ruby + +CONFIG_SCRIPTS=config/config.guess lib/gd/config/config.guess libltdl/config.guess \ + config/config.sub lib/gd/config/config.sub libltdl/config.sub + +configure: patch configure-stamp +configure-stamp: + dh_testdir + + # Update the config scripts + for i in $(CONFIG_SCRIPTS); do \ + cp /usr/share/misc/`basename $$i` $$i ; \ + done + + # Configure the package + ./configure --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) \ + --prefix=/usr \ + --datadir=\$${prefix}/share \ + --infodir=\$${prefix}/share/info \ + --mandir=\$${prefix}/share/man \ + --disable-static \ + --with-pangocairo \ + --with-x \ + --without-gdk-pixbuf \ + --without-gnomeui \ + --without-gtk \ + --without-gts \ + --without-ipsepcola \ + --without-rsvg \ + --enable-guile \ + --enable-lua \ + --enable-ocaml \ + --enable-php \ + --enable-python24 \ + --enable-ruby \ + --enable-tcl \ + --disable-java \ + --disable-r \ + --disable-sharp \ + LDFLAGS="-Wl,--as-needed" + touch configure-stamp + +build: configure build-stamp +build-stamp: + dh_testdir + + # Build + $(MAKE) + touch build-stamp + + # Build the manpage from SONAME-independent perlpod + sed -e 's/##SONAME##/$(SONAME)/g' \ + debian/libgraphviz-config-update.pod.in > \ + debian/libgraphviz$(SONAME)-config-update.pod + pod2man --center "GRAPHVIZ CONFIGURATION MANAGEMENT" \ + --release $(UPSTREAM_VERSION) \ + debian/libgraphviz$(SONAME)-config-update.pod \ + debian/libgraphviz$(SONAME)-config-update.1 + +clean: clean-patched unpatch +clean-patched: + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + # Clean up if a build already happened + [ ! -f Makefile ] || $(MAKE) distclean + + # Clean up intermediate and generated manpages + rm -f debian/libgraphviz$(SONAME)-config-update.pod + rm -f debian/libgraphviz$(SONAME)-config-update.1 + + dh_clean $(CONFIG_SCRIPTS) \ + tclpkg/gv/gv.R tclpkg/gv/php_gv.h + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Install the package into debian/tmp + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp + + # Remove .la files + find -name '*.la' -delete + + # Strip the rpath on /usr/lib (at least on amd64), but not + # on /usr/lib/graphviz (needed for the plugins), and bail + # out if it is another case, while ignoring if there's no + # RPATH at all (there are shell scripts under /usr/bin). + for i in debian/tmp/usr/bin/* ; do \ + case `chrpath -l -k $$i` in \ + *RPATH=/usr/lib/graphviz) ;; \ + *RPATH=/usr/lib) chrpath -d $$i ;; \ + *RPATH=/usr/lib:/usr/lib/graphviz) chrpath -r /usr/lib/graphviz $$i ;; \ + *RPATH=*) echo "Unknown RPATH: $$i" ; exit 1 ;; \ + *) ;; \ + esac ; \ + done + + # Install lintian overrides + install -d $(CURDIR)/debian/tmp/usr/share/lintian/overrides + install -m 644 $(CURDIR)/debian/libgraphviz$(SONAME).lintian-overrides \ + $(CURDIR)/debian/tmp/usr/share/lintian/overrides/libgraphviz$(SONAME) + + # Rename manpages: s/.n$/.3/ + for i in $(CURDIR)/debian/tmp/usr/share/man/mann/*.n ; do \ + mv $$i $${i%%.n}.3; \ + done + + # Move manpages + install -d $(CURDIR)/debian/tmp/usr/share/man/man3 + find $(CURDIR)/debian/tmp/usr/share/man/mann -name '*.3' \ + -exec mv {} $(CURDIR)/debian/tmp/usr/share/man/man3 ';' + + # Compute the dependencies of the -dev package + # NOTE: It is important to do that before splitting the files into + # their respective packages, otherwise the symlinks are broken + d-devlibdeps \ + --override s/libpathplan$(SONAME)-dev// \ + --override s/libgraph$(SONAME)-dev// \ + --override s/libcdt$(SONAME)-dev// \ + $(CURDIR)/debian/libgraphviz-dev.substvars \ + $(CURDIR)/debian/tmp/usr/lib/*.so + + # Move from debian/tmp to the appropriate packages, rename one binary + dh_install --sourcedir=debian/tmp --list-missing + mv $(CURDIR)/debian/libgraphviz$(SONAME)/usr/sbin/dot \ + $(CURDIR)/debian/libgraphviz$(SONAME)/usr/sbin/libgraphviz$(SONAME)-config-update + + # Some additional work for libgv-lua + # 1. Rename using the LUA_VERSION + mv $(LUA_PACKAGE)/usr/lib/graphviz/lua/libgv_lua.so \ + $(LUA_PACKAGE)/usr/lib/graphviz/lua/liblua$(LUA_VERSION)-libgv.so + # 2. Add a symlink + install -d $(LUA_PACKAGE)/usr/lib/lua/$(LUA_VERSION) + ln -s /usr/lib/graphviz/lua/liblua$(LUA_VERSION)-libgv.so \ + $(LUA_PACKAGE)/usr/lib/lua/$(LUA_VERSION)/gv.so + + # Some additional work for libgv-ocaml + # 1. Move the shared object to the stublibs directory + install -d $(OCAML_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/stublibs + mv $(OCAML_PACKAGE)/usr/lib/graphviz/ocaml/libgv_ocaml.so \ + $(OCAML_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/stublibs/dllgv.so + # 2. Move the devel files where they belong + install -d $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/gv + mv $(OCAML_PACKAGE)/usr/lib/graphviz/ocaml/*.ml* \ + $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/gv + # 3. Trash the (almost empty) directory (and its .la) + rm -rf $(OCAML_PACKAGE)/usr/lib/graphviz + + # Debian-specific manpage + dh_installman -plibgraphviz$(SONAME) \ + $(CURDIR)/debian/libgraphviz$(SONAME)-config-update.1 + + # Some additional work for libgv-ruby + install -d $(RUBY_PACKAGE)/usr/lib/ruby/$(RUBY_VERSION) + mv $(RUBY_PACKAGE)/usr/lib/graphviz/ruby/libgv_ruby.so \ + $(RUBY_PACKAGE)/usr/lib/ruby/$(RUBY_VERSION)/gv.so + rm -rf $(RUBY_PACKAGE)/usr/lib/graphviz + + # Install additional ocaml files + install -d $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/gv + cp debian/tmp/usr/lib/graphviz/ocaml/gv.cm* \ + $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/gv + install -d $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/METAS + mv debian/tmp/usr/lib/graphviz/ocaml/META.gv \ + $(DEV_PACKAGE)/usr/lib/ocaml/$(OCAMLABI)/METAS + +# Build architecture-independent files here. +binary-indep: build install + dh_testdir -i + dh_testroot -i + dh_installdocs -i + dh_installmenu -i + dh_installchangelogs ChangeLog -i + dh_perl -i + dh_link -i + dh_strip -i + dh_compress -i -X.pdf + dh_fixperms -i + dh_makeshlibs -i + dh_installdeb -i + dh_shlibdeps -i + dh_gencontrol -i + dh_md5sums -i + dh_builddeb -i + +# Build architecture-dependent files here. +# Pass -a to all debhelper commands in this target to reduce clutter. +binary-arch: build install + dh_testdir -a + dh_testroot -a + dh_installdocs -a -XMakefile + dh_installexamples -a + dh_installmenu -a + dh_installman -a + dh_installchangelogs ChangeLog -a + dh_perl -a + dh_pysupport -a + dh_link -a + dh_strip -a + dh_compress -a + dh_fixperms -a + dh_makeshlibs -plibgraphviz$(SONAME) -V 'libgraphviz4 (>= 2.20.0)' + dh_installdeb -a + dh_shlibdeps -a -L libgraphviz$(SONAME) $(CURDIR)/debian/libgraphviz$(SONAME)/usr/lib + dh_gencontrol -a -- -VF:OCamlABI="$(OCAMLABI)" + dh_md5sums -a + dh_builddeb -a + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- graphviz-2.20.2.orig/debian/graphviz-doc.install +++ graphviz-2.20.2/debian/graphviz-doc.install @@ -0,0 +1,11 @@ +usr/share/graphviz/lefty usr/share/doc/graphviz/examples +usr/share/graphviz/graphs usr/share/doc/graphviz/examples +usr/share/graphviz/demo usr/share/doc/graphviz/examples +usr/share/graphviz/doc/pdf usr/share/doc/graphviz +usr/share/graphviz/doc/html usr/share/doc/graphviz + +usr/share/graphviz/doc/AUTHORS usr/share/doc/graphviz +usr/share/graphviz/doc/ChangeLog usr/share/doc/graphviz +usr/share/graphviz/doc/Dot.ref usr/share/doc/graphviz +usr/share/graphviz/doc/latex_suggestions.txt usr/share/doc/graphviz + --- graphviz-2.20.2.orig/debian/libgraphviz4.install +++ graphviz-2.20.2/debian/libgraphviz4.install @@ -0,0 +1,7 @@ +# To be changed into an in extenso list if plugins are added +usr/lib/graphviz/lib*.so.* +usr/lib/lib*.so.* +usr/share/lintian/overrides + +# Renamed afterwards to graphvizN-config-update in debian/rules +usr/bin/dot usr/sbin --- graphviz-2.20.2.orig/debian/libgraphviz4.postrm +++ graphviz-2.20.2/debian/libgraphviz4.postrm @@ -0,0 +1,12 @@ +#!/bin/sh + +set -e + +# Remove the configuration file if present, see README.Debian-packaging +# Needed only in libgraphivzN +if [ -f /usr/lib/graphviz/config4 ]; then + rm -f /usr/lib/graphviz/config4 +fi + + +#DEBHELPER# --- graphviz-2.20.2.orig/debian/watch +++ graphviz-2.20.2/debian/watch @@ -0,0 +1,3 @@ +# Site Directory Pattern Version Script +version=3 +http://www.graphviz.org/pub/graphviz/ARCHIVE/graphviz-([0-9.]+)\.tar\.gz --- graphviz-2.20.2.orig/debian/libgraphviz4.postinst +++ graphviz-2.20.2/debian/libgraphviz4.postinst @@ -0,0 +1,17 @@ +#!/bin/sh + +set -e + +# Update the configuration file (/usr/lib/graphviz/config3) +# Needed for the plugins too +if [ -x /usr/sbin/libgraphviz4-config-update ]; then + /usr/sbin/libgraphviz4-config-update -c +fi + +# Remove the old configuration file if present, see README.Debian-packaging +# Needed only in libgraphivzN +if [ -f /usr/lib/graphviz/config ]; then + rm -f /usr/lib/graphviz/config +fi + +#DEBHELPER# --- graphviz-2.20.2.orig/debian/libgv-tcl.install +++ graphviz-2.20.2/debian/libgv-tcl.install @@ -0,0 +1,5 @@ +usr/lib/graphviz/tcl usr/lib/tcltk/graphviz +usr/share/man/man3/gv_tcl.3 +usr/share/man/man3/gdtclft.3 +usr/share/man/man3/tkspline.3 +usr/share/man/man3/tcldot.3 --- graphviz-2.20.2.orig/debian/libgv-php5.README.Debian +++ graphviz-2.20.2/debian/libgv-php5.README.Debian @@ -0,0 +1,17 @@ +README for libgv-php5: +---------------------- + + * This PHP extension contains two parts: gv.php and gv.so. + * Since the search path isn't recursive, one has to use the following + to use this extension (filename relative to /usr/share/php): + include('libgv-php5/gv.php'); + * Since this extension contains a loadable module, it seems needed to + enable them in the PHP configuration. At the time of this writing, it + can be done by switching enable_dl from Off to On in the following + configuration file: + /etc/php5/cli/php.ini + * This particular file contains comments about possible security issues + when enabling loadable modules. Those comments probably should be + taken into account. + + -- Cyril Brulebois , Mon, 28 Jul 2008 05:09:59 +0200 --- graphviz-2.20.2.orig/debian/README.Debian +++ graphviz-2.20.2/debian/README.Debian @@ -0,0 +1,28 @@ +graphviz for Debian +------------------- + + * Various examples are available in the graphviz-doc package, + shipped under /usr/share/doc/graphviz/examples. It might be needed + to adjust some paths to make the demo scripts work out of the box, + patches are welcome. + * One might also be interested in the contrib/ directory of the + source package. Note that starting with 2.16.1-1, the diffimg + utility is built and shipped in the graphviz package. + * Original notes about packages suggested by graphviz: + - The msttcorefonts package is suggested so that TrueType fonts + are available if necessary. + - The gsfonts package is suggested in case X isn't installed, + since it contains default fonts. + * Those notes were kept verbatim and probably need an update, like + the package relationships themselves. Comments are welcome in the + meanwhile. + * A “global” manpage (graphviz.7) is available so that one can + easily find all graphviz-related binaries and their role. Thanks + again to Joachim Berdal Haga for having + proposed such a list. + * For references, from the 2.12-4 upload (Thu, 09 Aug 2007): Java + and C# bindings (#360970 and #360977) are not planned at the + moment, given the restrictions on the architectures on which they + are available. Anyway, any tested patch is welcome to add them. + + -- Cyril Brulebois , Thu, 14 Feb 2008 14:15:32 +0100 --- graphviz-2.20.2.orig/debian/pyversions +++ graphviz-2.20.2/debian/pyversions @@ -0,0 +1 @@ +2.4,2.5 --- graphviz-2.20.2.orig/debian/libgraphviz4.lintian-overrides +++ graphviz-2.20.2/debian/libgraphviz4.lintian-overrides @@ -0,0 +1,2 @@ +# We have several shared objects... +libgraphviz4: package-name-doesnt-match-sonames libagraph4 libcdt4 libcgraph4 libgraph4 libgvc4 libpathplan4 --- graphviz-2.20.2.orig/debian/copyright +++ graphviz-2.20.2/debian/copyright @@ -0,0 +1,246 @@ +This package was originally debianized by Stephen M Moraco + on Fri, 31 Dec 1999 15:37:17 -0700. + +It was downloaded from http://www.graphviz.org/ + + +Upstream Authors: + + John Ellson, Lucent (TCL/tk and codegen extensions) + Emden Gansner, AT&T Research (dot, neato) + Eleftherios Koutsofios, AT&T Research (dotty, lefty, spline-o-matic) + John Mocenigo, AT&T Research (Grappa) + Stephen North, AT&T Research (dot, neato) + Gordon Woodhull (Montage) + and + David Dobkin (spline-o-matic) + Vladimir Alexiev (codegen improvements) + + +Copyright: + + Copyright 1994-2007 AT&T Corp. + + +License: + Common Public License Version 1.0 + +THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC +LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM +CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT. + +1. DEFINITIONS + +"Contribution" means: + + a) in the case of the initial Contributor, the initial code and +documentation distributed under this Agreement, and + + b) in the case of each subsequent Contributor: + + i) changes to the Program, and + + ii) additions to the Program; + + where such changes and/or additions to the Program originate from and are +distributed by that particular Contributor. A Contribution 'originates' from a +Contributor if it was added to the Program by such Contributor itself or anyone +acting on such Contributor's behalf. Contributions do not include additions to +the Program which: (i) are separate modules of software distributed in +conjunction with the Program under their own license agreement, and (ii) are not +derivative works of the Program. + +"Contributor" means any person or entity that distributes the Program. + +"Licensed Patents " mean patent claims licensable by a Contributor which are +necessarily infringed by the use or sale of its Contribution alone or when +combined with the Program. + +"Program" means the Contributions distributed in accordance with this Agreement. + +"Recipient" means anyone who receives the Program under this Agreement, +including all Contributors. + +2. GRANT OF RIGHTS + + a) Subject to the terms of this Agreement, each Contributor hereby grants +Recipient a non-exclusive, worldwide, royalty-free copyright license to +reproduce, prepare derivative works of, publicly display, publicly perform, +distribute and sublicense the Contribution of such Contributor, if any, and such +derivative works, in source code and object code form. + + b) Subject to the terms of this Agreement, each Contributor hereby grants +Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed +Patents to make, use, sell, offer to sell, import and otherwise transfer the +Contribution of such Contributor, if any, in source code and object code form. +This patent license shall apply to the combination of the Contribution and the +Program if, at the time the Contribution is added by the Contributor, such +addition of the Contribution causes such combination to be covered by the +Licensed Patents. The patent license shall not apply to any other combinations +which include the Contribution. No hardware per se is licensed hereunder. + + c) Recipient understands that although each Contributor grants the licenses +to its Contributions set forth herein, no assurances are provided by any +Contributor that the Program does not infringe the patent or other intellectual +property rights of any other entity. Each Contributor disclaims any liability to +Recipient for claims brought by any other entity based on infringement of +intellectual property rights or otherwise. As a condition to exercising the +rights and licenses granted hereunder, each Recipient hereby assumes sole +responsibility to secure any other intellectual property rights needed, if any. +For example, if a third party patent license is required to allow Recipient to +distribute the Program, it is Recipient's responsibility to acquire that license +before distributing the Program. + + d) Each Contributor represents that to its knowledge it has sufficient +copyright rights in its Contribution, if any, to grant the copyright license set +forth in this Agreement. + +3. REQUIREMENTS + +A Contributor may choose to distribute the Program in object code form under its +own license agreement, provided that: + + a) it complies with the terms and conditions of this Agreement; and + + b) its license agreement: + + i) effectively disclaims on behalf of all Contributors all warranties and +conditions, express and implied, including warranties or conditions of title and +non-infringement, and implied warranties or conditions of merchantability and +fitness for a particular purpose; + + ii) effectively excludes on behalf of all Contributors all liability for +damages, including direct, indirect, special, incidental and consequential +damages, such as lost profits; + + iii) states that any provisions which differ from this Agreement are offered +by that Contributor alone and not by any other party; and + + iv) states that source code for the Program is available from such +Contributor, and informs licensees how to obtain it in a reasonable manner on or +through a medium customarily used for software exchange. + +When the Program is made available in source code form: + + a) it must be made available under this Agreement; and + + b) a copy of this Agreement must be included with each copy of the Program. + +Contributors may not remove or alter any copyright notices contained within the +Program. + +Each Contributor must identify itself as the originator of its Contribution, if +any, in a manner that reasonably allows subsequent Recipients to identify the +originator of the Contribution. + +4. COMMERCIAL DISTRIBUTION + +Commercial distributors of software may accept certain responsibilities with +respect to end users, business partners and the like. While this license is +intended to facilitate the commercial use of the Program, the Contributor who +includes the Program in a commercial product offering should do so in a manner +which does not create potential liability for other Contributors. Therefore, if +a Contributor includes the Program in a commercial product offering, such +Contributor ("Commercial Contributor") hereby agrees to defend and indemnify +every other Contributor ("Indemnified Contributor") against any losses, damages +and costs (collectively "Losses") arising from claims, lawsuits and other legal +actions brought by a third party against the Indemnified Contributor to the +extent caused by the acts or omissions of such Commercial Contributor in +connection with its distribution of the Program in a commercial product +offering. The obligations in this section do not apply to any claims or Losses +relating to any actual or alleged intellectual property infringement. In order +to qualify, an Indemnified Contributor must: a) promptly notify the Commercial +Contributor in writing of such claim, and b) allow the Commercial Contributor to +control, and cooperate with the Commercial Contributor in, the defense and any +related settlement negotiations. The Indemnified Contributor may participate in +any such claim at its own expense. + +For example, a Contributor might include the Program in a commercial product +offering, Product X. That Contributor is then a Commercial Contributor. If that +Commercial Contributor then makes performance claims, or offers warranties +related to Product X, those performance claims and warranties are such +Commercial Contributor's responsibility alone. Under this section, the +Commercial Contributor would have to defend claims against the other +Contributors related to those performance claims and warranties, and if a court +requires any other Contributor to pay any damages as a result, the Commercial +Contributor must pay those damages. + +5. NO WARRANTY + +EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR +IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, +NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each +Recipient is solely responsible for determining the appropriateness of using and +distributing the Program and assumes all risks associated with its exercise of +rights under this Agreement, including but not limited to the risks and costs of +program errors, compliance with applicable laws, damage to or loss of data, +programs or equipment, and unavailability or interruption of operations. + +6. DISCLAIMER OF LIABILITY + +EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY +CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST +PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS +GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +7. GENERAL + +If any provision of this Agreement is invalid or unenforceable under applicable +law, it shall not affect the validity or enforceability of the remainder of the +terms of this Agreement, and without further action by the parties hereto, such +provision shall be reformed to the minimum extent necessary to make such +provision valid and enforceable. + +If Recipient institutes patent litigation against a Contributor with respect to +a patent applicable to software (including a cross-claim or counterclaim in a +lawsuit), then any patent licenses granted by that Contributor to such Recipient +under this Agreement shall terminate as of the date such litigation is filed. In +addition, if Recipient institutes patent litigation against any entity +(including a cross-claim or counterclaim in a lawsuit) alleging that the Program +itself (excluding combinations of the Program with other software or hardware) +infringes such Recipient's patent(s), then such Recipient's rights granted under +Section 2(b) shall terminate as of the date such litigation is filed. + +All Recipient's rights under this Agreement shall terminate if it fails to +comply with any of the material terms or conditions of this Agreement and does +not cure such failure in a reasonable period of time after becoming aware of +such noncompliance. If all Recipient's rights under this Agreement terminate, +Recipient agrees to cease use and distribution of the Program as soon as +reasonably practicable. However, Recipient's obligations under this Agreement +and any licenses granted by Recipient relating to the Program shall continue and +survive. + +Everyone is permitted to copy and distribute copies of this Agreement, but in +order to avoid inconsistency the Agreement is copyrighted and may only be +modified in the following manner. The Agreement Steward reserves the right to +publish new versions (including revisions) of this Agreement from time to time. +No one other than the Agreement Steward has the right to modify this Agreement. +IBM is the initial Agreement Steward. IBM may assign the responsibility to serve +as the Agreement Steward to a suitable separate entity. Each new version of the +Agreement will be given a distinguishing version number. The Program (including +Contributions) may always be distributed subject to the version of the Agreement +under which it was received. In addition, after a new version of the Agreement +is published, Contributor may elect to distribute the Program (including its +Contributions) under the new version. Except as expressly stated in Sections +2(a) and 2(b) above, Recipient receives no rights or licenses to the +intellectual property of any Contributor under this Agreement, whether +expressly, by implication, estoppel or otherwise. All rights in the Program not +expressly granted under this Agreement are reserved. + +This Agreement is governed by the laws of the State of New York and the +intellectual property laws of the United States of America. No party to this +Agreement will bring a legal action under this Agreement more than one year +after the cause of action arose. Each party waives its rights to a jury trial in +any resulting litigation. + + + +The Debian packaging was started by Stephen M Moraco and +then was taken over in late 2006 by Cyril Brulebois, placing his work under the +same terms as graphviz itself. + © 2006-2008, Cyril Brulebois + --- graphviz-2.20.2.orig/debian/TODO +++ graphviz-2.20.2/debian/TODO @@ -0,0 +1,27 @@ +TODO for graphviz +----------------- + + * Check the dependencies for all bindings, e.g. libgv-guile doesn't seem to + depend on any guile package. + * The handling of the libgv-php5 package could be better. An idea would be to + have a debian/libgv-php5.install.in file, which would be preprocessed, so + that the appropriate path is computed at build-time (using the output of + the “php-config5 --extension-dir” command). + * That should really be done for all languages needing extra work, + see debian/rules. + * Think about putting the configuration file into /var, see the discussion + with Alexander on the 10th of August. + * Stop using -lstdc++ and use CXX (not trivial actually). + * Adjust --build and --host options to ./configure so as to support cross- + compilation correctly. + * The Conflicts between libgv-perl and older graphviz might go away since the + location of perl files was adapted to follow the perl policy. To be checked + with piuparts. + * Check and eventually refresh the package relationships (Suggests:, + and maybe the Conflicts: towards gdtclft). + * Tcl/Tk: + - Check the .0.0.0 stuff for the Tcl parts. Should it be using + “-module -avoid-version” too? + * fontconfig results in no dependency, that might be dropped from the B-D. + + -- Cyril Brulebois Wed, 09 Jan 2008 03:18:46 +0100 --- graphviz-2.20.2.orig/debian/libgraphviz-config-update.pod.in +++ graphviz-2.20.2/debian/libgraphviz-config-update.pod.in @@ -0,0 +1,32 @@ +=head1 NAME + +libgraphviz##SONAME##-config-update - maintain libgraphviz's configuration file + + +=head1 SYNOPSIS + +B B<-c> + + +=head1 DESCRIPTION + +Graphviz tools are using a configuration file +(F at the moment) to get some +plugin options. This command is used in B and +B packages' maintainer scripts to +update this configuration file when plugins are installed, updated, or +removed. + + +=head1 NOTE + +This tool is intended to be used only in maintainer scripts and it +shouldn't be needed to run it manually. + + +=head1 AUTHOR + +This manual page was written by Cyril Brulebois +. + +It can be distributed under the same terms as the graphviz package. --- graphviz-2.20.2.orig/debian/libgv-perl.install +++ graphviz-2.20.2/debian/libgv-perl.install @@ -0,0 +1,4 @@ +usr/lib/graphviz/perl/gv.pm usr/lib/perl5 +usr/lib/graphviz/perl/gv.so usr/lib/perl5/auto/gv +usr/lib/graphviz/perl/libgv_perl.so usr/lib/perl5/auto/gv +usr/share/man/man3/gv_perl.3 --- graphviz-2.20.2.orig/debian/graphviz.install +++ graphviz-2.20.2/debian/graphviz.install @@ -0,0 +1,4 @@ +usr/bin +usr/share/man/man1 +usr/share/man/man7 +usr/share/graphviz/lefty --- graphviz-2.20.2.orig/debian/libgv-guile.install +++ graphviz-2.20.2/debian/libgv-guile.install @@ -0,0 +1,2 @@ +usr/lib/graphviz/guile/libgv_guile.so +usr/share/man/man3/gv_guile.3 --- graphviz-2.20.2.orig/debian/compat +++ graphviz-2.20.2/debian/compat @@ -0,0 +1 @@ +5 --- graphviz-2.20.2.orig/debian/libgv-python.install +++ graphviz-2.20.2/debian/libgv-python.install @@ -0,0 +1,4 @@ +usr/lib/graphviz/python +usr/lib/graphviz/python24 +usr/lib/graphviz/python25 +usr/share/man/man3/gv_python.3 --- graphviz-2.20.2.orig/debian/libgv-php5.install +++ graphviz-2.20.2/debian/libgv-php5.install @@ -0,0 +1,2 @@ +usr/lib/graphviz/php +usr/share/man/man3/gv_php.3 --- graphviz-2.20.2.orig/debian/libgraphviz-dev.install +++ graphviz-2.20.2/debian/libgraphviz-dev.install @@ -0,0 +1,12 @@ +usr/include/graphviz +usr/lib/pkgconfig +usr/lib/*.so +usr/lib/graphviz/*.so + +# usr/share/man/man3/* w/o gv_*.3 (bindings) +usr/share/man/man3/cdt.3 +usr/share/man/man3/graph.3 +usr/share/man/man3/agraph.3 +usr/share/man/man3/cgraph.3 +usr/share/man/man3/pathplan.3 +usr/share/man/man3/gvc.3 --- graphviz-2.20.2.orig/debian/graphviz.menu +++ graphviz-2.20.2/debian/graphviz.menu @@ -0,0 +1,4 @@ +?package(graphviz):needs="X11" section="Applications/Graphics" \ + title="dotty" command="/usr/bin/dotty" +?package(graphviz):needs="X11" section="Applications/Graphics" \ + title="lefty" command="/usr/bin/lefty" --- graphviz-2.20.2.orig/debian/libgv-ocaml.install +++ graphviz-2.20.2/debian/libgv-ocaml.install @@ -0,0 +1,2 @@ +usr/lib/graphviz/ocaml +usr/share/man/man3/gv_ocaml.3 --- graphviz-2.20.2.orig/debian/libgv-lua.install +++ graphviz-2.20.2/debian/libgv-lua.install @@ -0,0 +1,2 @@ +usr/lib/graphviz/lua/libgv_lua.so +usr/share/man/man3/gv_lua.3 --- graphviz-2.20.2.orig/debian/patches/0_tcl_manpages_section +++ graphviz-2.20.2/debian/patches/0_tcl_manpages_section @@ -0,0 +1,27 @@ +--- a/tclpkg/gdtclft/gdtclft.n ++++ b/tclpkg/gdtclft/gdtclft.n +@@ -1,4 +1,4 @@ +-.TH gdtclft n 8.0 "Tcl-Extensions" ++.TH gdtclft 3 8.0 "Tcl-Extensions" + .HS gdtclft tcl + .BS + .SH NAME +--- a/tclpkg/tcldot/tcldot.n ++++ b/tclpkg/tcldot/tcldot.n +@@ -1,4 +1,4 @@ +-.TH TCLDOT n "02 December 1996" ++.TH TCLDOT 3 "02 December 1996" + + .SH NAME + +--- a/tclpkg/tkspline/tkspline.n ++++ b/tclpkg/tkspline/tkspline.n +@@ -235,7 +235,7 @@ + \\$1\l'|0\(ul'\\$2 + .. + .lf 2 tkspline.n +-.TH tkspline n 8.0 Tk "Tk Spline \- An additional smoothing method for canvas items " ++.TH tkspline 3 8.0 Tk "Tk Spline \- An additional smoothing method for canvas items " + .BS + '\" Note: do not modify the .SH NAME line immediately below! + .SH NAME --- graphviz-2.20.2.orig/debian/patches/0_libtool_linking_reorder_workaround +++ graphviz-2.20.2/debian/patches/0_libtool_linking_reorder_workaround @@ -0,0 +1,60 @@ +--- a/config/ltmain.sh 2007-12-26 15:10:00.000000000 +0100 ++++ b/config/ltmain.sh 2007-12-26 15:10:24.000000000 +0100 +@@ -1784,6 +1784,11 @@ + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + ++ -Wl,--as-needed) ++ deplibs="$deplibs $arg" ++ continue ++ ;; ++ + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= +@@ -2124,6 +2129,15 @@ + lib= + found=no + case $deplib in ++ -Wl,--as-needed) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ fi ++ continue ++ ;; + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" +--- a/libltdl/ltmain.sh 2007-12-26 15:10:00.000000000 +0100 ++++ b/libltdl/ltmain.sh 2007-12-26 15:10:43.000000000 +0100 +@@ -1784,6 +1784,11 @@ + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + ++ -Wl,--as-needed) ++ deplibs="$deplibs $arg" ++ continue ++ ;; ++ + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= +@@ -2124,6 +2129,15 @@ + lib= + found=no + case $deplib in ++ -Wl,--as-needed) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ fi ++ continue ++ ;; + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" --- graphviz-2.20.2.orig/debian/patches/10_fix_tred_regression +++ graphviz-2.20.2/debian/patches/10_fix_tred_regression @@ -0,0 +1,11 @@ +--- a/cmd/tools/tred.c ++++ b/cmd/tools/tred.c +@@ -102,7 +102,7 @@ + agnameof(agtail(e)), agnameof(aghead(e))); + } + } else +- warn = dfs(aghead(e), e, warn); ++ warn = dfs(aghead(e), AGOUT2IN(e), warn); + } + + MARK(n) = 0; --- graphviz-2.20.2.orig/debian/patches/series +++ graphviz-2.20.2/debian/patches/series @@ -0,0 +1,6 @@ +0_versioned_plugin_config_file +0_bindings_documentation +0_tcl_manpages_section +#0_libtool_linking_reorder_workaround +10_fix_tred_regression +20_fix_parser_stack_overflow --- graphviz-2.20.2.orig/debian/patches/20_fix_parser_stack_overflow +++ graphviz-2.20.2/debian/patches/20_fix_parser_stack_overflow @@ -0,0 +1,66 @@ +--- a/lib/graph/parser.c ++++ b/lib/graph/parser.c +@@ -110,7 +110,8 @@ static Agraph_t *G; + static Agnode_t *N; + static Agedge_t *E; + static objstack_t *SP; +-static Agraph_t *Gstack[32]; ++#define GSTACK_SIZE 64 ++static Agraph_t *Gstack[GSTACK_SIZE]; + static int GSP; + + static void subgraph_warn (void) +@@ -123,6 +124,9 @@ static void subgraph_warn (void) + + static void push_subg(Agraph_t *g) + { ++ if (GSP >= GSTACK_SIZE) { ++ agerr (AGERR, "Gstack overflow in graph parser\n"); exit(1); ++ } + G = Gstack[GSP++] = g; + } + +--- a/lib/graph/parser.y ++++ b/lib/graph/parser.y +@@ -31,7 +31,8 @@ static Agraph_t *G; + static Agnode_t *N; + static Agedge_t *E; + static objstack_t *SP; +-static Agraph_t *Gstack[32]; ++#define GSTACK_SIZE 64 ++static Agraph_t *Gstack[GSTACK_SIZE]; + static int GSP; + + static void subgraph_warn (void) +@@ -44,6 +45,9 @@ static void subgraph_warn (void) + + static void push_subg(Agraph_t *g) + { ++ if (GSP >= GSTACK_SIZE) { ++ agerr (AGERR, "Gstack overflow in graph parser\n"); exit(1); ++ } + G = Gstack[GSP++] = g; + } + +--- a/lib/graph/y.tab.c ++++ b/lib/graph/y.tab.c +@@ -110,7 +110,8 @@ static Agraph_t *G; + static Agnode_t *N; + static Agedge_t *E; + static objstack_t *SP; +-static Agraph_t *Gstack[32]; ++#define GSTACK_SIZE 64 ++static Agraph_t *Gstack[GSTACK_SIZE]; + static int GSP; + + static void subgraph_warn (void) +@@ -123,6 +124,9 @@ static void subgraph_warn (void) + + static void push_subg(Agraph_t *g) + { ++ if (GSP >= GSTACK_SIZE) { ++ agerr (AGERR, "Gstack overflow in graph parser\n"); exit(1); ++ } + G = Gstack[GSP++] = g; + } + --- graphviz-2.20.2.orig/debian/patches/0_bindings_documentation +++ graphviz-2.20.2/debian/patches/0_bindings_documentation @@ -0,0 +1,50 @@ +--- a/tclpkg/gv/gv_doc_langs.tcl ++++ b/tclpkg/gv/gv_doc_langs.tcl +@@ -58,7 +58,7 @@ + gv. ( {, } {);} + } + SYNOPSIS { +- {(load-extension "./libgv.so" "SWIG_init")} ++ {(load-extension "/usr/lib/graphviz/guile/libgv_guile.so" "SWIG_init")} + } + USAGE { + } +@@ -209,6 +209,13 @@ + gv. ( {, } {);} + } + SYNOPSIS { ++ {Run the ocaml interpreter} ++ {} ++ {#use "topfind";;} ++ {- : unit = ()} ++ {} ++ {#require "gv";;} ++ {/usr/lib/ocaml/3.10.0/gv/gv.cma: loaded} + } + USAGE { + } +@@ -297,7 +304,7 @@ + SYNOPSIS { + {#!/usr/bin/php} + {} + } +@@ -343,7 +350,6 @@ + } + SYNOPSIS { + {#!/usr/bin/python} +- {import sys} + {import gv} + } + USAGE { +--- a/tclpkg/gv/gv_doc_template.tcl ++++ b/tclpkg/gv/gv_doc_template.tcl +@@ -1,4 +1,4 @@ +-.TH GV_[string toupper $lang] N \"[clock format [clock seconds] -format "%d %B %Y"]\" ++.TH GV_[string toupper $lang] 3 \"[clock format [clock seconds] -format "%d %B %Y"]\" + + .SH NAME + --- graphviz-2.20.2.orig/debian/patches/0_versioned_plugin_config_file +++ graphviz-2.20.2/debian/patches/0_versioned_plugin_config_file @@ -0,0 +1,11 @@ +--- a/lib/gvc/gvconfig.c ++++ b/lib/gvc/gvconfig.c +@@ -474,7 +474,7 @@ + FILE *f = NULL; + char *config_text = NULL; + char *libdir; +- char *config_file_name = "config"; ++ char *config_file_name = "config4"; + + #define MAX_SZ_CONFIG 100000 + #endif