--- jasper-1.900.1.orig/config.guess +++ jasper-1.900.1/config.guess @@ -0,0 +1,1500 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. + +timestamp='2006-07-02' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + x86:Interix*:[3456]*) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T:Interix*:[3456]*) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: --- jasper-1.900.1.orig/config.sub +++ jasper-1.900.1/config.sub @@ -0,0 +1,1608 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. + +timestamp='2006-07-02' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: --- jasper-1.900.1.orig/debian/control +++ jasper-1.900.1/debian/control @@ -0,0 +1,49 @@ +Source: jasper +Priority: optional +Section: graphics +Maintainer: Roland Stigge +Build-Depends: debhelper (>> 4.0.18), freeglut3-dev, libjpeg62-dev, libxi-dev, libxmu-dev, libxt-dev, dpatch +Standards-Version: 3.8.0 + +Package: libjasper1 +Section: libs +Architecture: any +Depends: ${shlibs:Depends} +Conflicts: libjasper-1.700-2 +Replaces: libjasper-1.700-2 +Suggests: libjasper-runtime +Description: The JasPer JPEG-2000 runtime library + JasPer is a collection of software (i.e., a library and application programs) + for the coding and manipulation of images. This software can handle image + data in a variety of formats. One such format supported by JasPer is the + JPEG-2000 format defined in ISO/IEC 15444-1:2000. + . + This package contains the shared library. + +Package: libjasper-dev +Section: libdevel +Architecture: any +Depends: libjasper1 (= ${binary:Version}) +Conflicts: libjasper-1.700-2-dev +Replaces: libjasper-1.700-2-dev +Description: Development files for the JasPer JPEG-2000 library + JasPer is a collection of software (i.e., a library and application programs) + for the coding and manipulation of images. This software can handle image + data in a variety of formats. One such format supported by JasPer is the + JPEG-2000 format defined in ISO/IEC 15444-1:2000. + . + This package contains the static library and headers. + +Package: libjasper-runtime +Section: graphics +Architecture: any +Depends: ${shlibs:Depends} +Conflicts: libjasper-progs +Replaces: libjasper-progs +Description: Programs for manipulating JPEG-2000 files + JasPer is a collection of software (i.e., a library and application programs) + for the coding and manipulation of images. This software can handle image + data in a variety of formats. One such format supported by JasPer is the + JPEG-2000 format defined in ISO/IEC 15444-1:2000. + . + This package contains programs for manipulating JPEG-2000 files. --- jasper-1.900.1.orig/debian/libjasper-dev.install +++ jasper-1.900.1/debian/libjasper-dev.install @@ -0,0 +1,22 @@ +debian/tmp/usr/include/jasper/jas_cm.h +debian/tmp/usr/include/jasper/jas_config.h +debian/tmp/usr/include/jasper/jas_config2.h +debian/tmp/usr/include/jasper/jas_debug.h +debian/tmp/usr/include/jasper/jas_fix.h +debian/tmp/usr/include/jasper/jas_getopt.h +debian/tmp/usr/include/jasper/jas_icc.h +debian/tmp/usr/include/jasper/jas_image.h +debian/tmp/usr/include/jasper/jas_init.h +debian/tmp/usr/include/jasper/jas_malloc.h +debian/tmp/usr/include/jasper/jas_math.h +debian/tmp/usr/include/jasper/jas_seq.h +debian/tmp/usr/include/jasper/jas_stream.h +debian/tmp/usr/include/jasper/jas_string.h +debian/tmp/usr/include/jasper/jas_tmr.h +debian/tmp/usr/include/jasper/jas_tvp.h +debian/tmp/usr/include/jasper/jas_types.h +debian/tmp/usr/include/jasper/jas_version.h +debian/tmp/usr/include/jasper/jasper.h +debian/tmp/usr/lib/libjasper.a +debian/tmp/usr/lib/libjasper.la +debian/tmp/usr/lib/libjasper.so --- jasper-1.900.1.orig/debian/jasper.1 +++ jasper-1.900.1/debian/jasper.1 @@ -0,0 +1,19 @@ +.TH jasper 1 "20 June 2004" "Version 1.701.0" "JasPer Manual" + +.SH NAME +jasper \- File format converter specialized in JPEG-2000 encoding + +.SH SYNOPSIS +.B jasper +.RI [ options ] + +.SH DESCRIPTION +The +.B jasper +command converts to and from JPEG-2000 files. Please use the \-\-help command +line switch and the JasPer Software Reference Manual for more information. + +.SH AUTHOR +Michael D. Adams +This manpage was initially written by Roland Stigge for +the Debian Project. --- jasper-1.900.1.orig/debian/changelog +++ jasper-1.900.1/debian/changelog @@ -0,0 +1,94 @@ +jasper (1.900.1-5.1~bpo40+1) etch-backports; urgency=low + + * Backport testing version for backports.org + + -- Micah Anderson Fri, 16 Jan 2009 21:01:26 +0000 + +jasper (1.900.1-5.1) unstable; urgency=low + + * Non-maintainer upload. + * add patches/02_security.dpatch to fix various CVEs (Closes: #501021): + + CVE-2008-3522[0]: Buffer overflow. + + CVE-2008-3521[1]: unsecure temporary files handling. + + CVE-2008-3520[2]: Multiple integer overflows. + + -- Pierre Habouzit Sun, 12 Oct 2008 21:40:59 +0200 + +jasper (1.900.1-5) unstable; urgency=low + + * Added GeoJP2 patch by Sven Geggus + (Closes: #275619) + * debian/control: Standards-Version: 3.8.0 + + -- Roland Stigge Sun, 08 Jun 2008 13:14:24 +0200 + +jasper (1.900.1-4) unstable; urgency=low + + * src/libjasper/jpc/jpc_dec.c: Extended assert() to accept 4 color + components (Closes: #469786) + * debian/rules: improve "make distclean", thanks to lintian + * debian/control: + - Standards-Version: 3.7.3 + - ${Source-Version} -> ${binary:Version} + - Removed self-dependencies of libjasper-dev + + -- Roland Stigge Sun, 09 Mar 2008 11:53:44 +0100 + +jasper (1.900.1-3) unstable; urgency=low + + * Fixed segfaults on broken images (Closes: #413041) + + -- Roland Stigge Tue, 10 Apr 2007 10:05:10 +0200 + +jasper (1.900.1-2) experimental; urgency=low + + * Added jas_tmr.h to -dev package (Closes: #414705) + + -- Roland Stigge Tue, 13 Mar 2007 14:23:58 +0100 + +jasper (1.900.1-1) experimental; urgency=low + + * New upstream release + * debian/control: + - Standards-Version: 3.7.2 + - Build-Depends: freeglut3-dev instead of libglut3-dev (Closes: #394496) + * Renamed packages to libjasper1, libjasper-dev, libjasper-runtime according + to upstream shared library naming change + + -- Roland Stigge Fri, 26 Jan 2007 14:22:18 +0100 + +jasper (1.701.0-2) unstable; urgency=low + + * Prevent compression of pdf documents in binary packages + * Added man pages for the executables (Closes: #250077) + * Again renamed binary packages to reflect Policy: + - libjasper-1.701-1 + - libjasper-1.701-dev (Provides, Replaces and Conflicts: libjasper-dev) + - libjasper-runtime + + -- Roland Stigge Sun, 20 Jun 2004 13:54:10 +0200 + +jasper (1.701.0-1) unstable; urgency=low + + * New maintainer (Closes: #217099) + * New upstream release (Closes: #217570) + - new DFSG-compliant license (Closes: #218999, #245075) + - includes newer libtool related files (Closes: #210383) + * debian/control: + - Standards-Version: 3.6.1 + - Changed binary package names, fixed interdependencies (Closes: #211592) + libjasper-1.700-2 => libjasper1 + libjasper-1.700-2-dev => libjasper-dev + libjasper-progs => libjasper-runtime + (new packages conflicting and replacing the old ones) + - Added libxi-dev, libxmu-dev, libxt-dev to Build-Depends + (Closes: #250481) + + -- Roland Stigge Sat, 19 Jun 2004 23:19:32 +0200 + +jasper (1.700.2-1) unstable; urgency=low + + * Initial Release. + + -- Christopher L Cheney Fri, 22 Aug 2003 01:30:00 -0500 + --- jasper-1.900.1.orig/debian/copyright +++ jasper-1.900.1/debian/copyright @@ -0,0 +1,62 @@ +This package was debianized by Christopher L Cheney on +Fri, 22 Aug 2003 01:33:34 -0500. + +The current maintainer is Roland Stigge + +It was downloaded from http://www.ece.uvic.ca/~mdadams/jasper/ + +Upstream Author: Michael Adams + +License: + +JasPer License Version 2.0 + +Copyright (c) 1999-2000 Image Power, Inc. +Copyright (c) 1999-2000 The University of British Columbia +Copyright (c) 2001-2003 Michael David Adams + +All rights reserved. + +Permission is hereby granted, free of charge, to any person (the +"User") obtaining a copy of this software and associated documentation +files (the "Software"), to deal in the Software without restriction, +including without limitation the rights to use, copy, modify, merge, +publish, distribute, and/or sell copies of the Software, and to permit +persons to whom the Software is furnished to do so, subject to the +following conditions: + +1. The above copyright notices and this permission notice (which +includes the disclaimer below) shall be included in all copies or +substantial portions of the Software. + +2. The name of a copyright holder shall not be used to endorse or +promote products derived from the Software without specific prior +written permission. + +THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS +LICENSE. NO USE OF THE SOFTWARE IS AUTHORIZED HEREUNDER EXCEPT UNDER +THIS DISCLAIMER. THE SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS +"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A +PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO +EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL +INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING +FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, +NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION +WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. NO ASSURANCES ARE +PROVIDED BY THE COPYRIGHT HOLDERS THAT THE SOFTWARE DOES NOT INFRINGE +THE PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF ANY OTHER ENTITY. +EACH COPYRIGHT HOLDER DISCLAIMS ANY LIABILITY TO THE USER FOR CLAIMS +BROUGHT BY ANY OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL +PROPERTY RIGHTS OR OTHERWISE. AS A CONDITION TO EXERCISING THE RIGHTS +GRANTED HEREUNDER, EACH USER HEREBY ASSUMES SOLE RESPONSIBILITY TO SECURE +ANY OTHER INTELLECTUAL PROPERTY RIGHTS NEEDED, IF ANY. THE SOFTWARE +IS NOT FAULT-TOLERANT AND IS NOT INTENDED FOR USE IN MISSION-CRITICAL +SYSTEMS, SUCH AS THOSE USED IN THE OPERATION OF NUCLEAR FACILITIES, +AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL +SYSTEMS, DIRECT LIFE SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH +THE FAILURE OF THE SOFTWARE OR SYSTEM COULD LEAD DIRECTLY TO DEATH, +PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH +RISK ACTIVITIES"). THE COPYRIGHT HOLDERS SPECIFICALLY DISCLAIM ANY +EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES. + --- jasper-1.900.1.orig/debian/README.Debian +++ jasper-1.900.1/debian/README.Debian @@ -0,0 +1,9 @@ +JasPer JPEG-2000 library for Debian +=================================== + +Packages build-depending on jasper should Build-Depend: libjasper-dev +which is currently a virtual package provided by the latest development +package of jasper. + +-- +Roland Stigge , Sun, 20 Jun 2004 22:47:19 +0200 --- jasper-1.900.1.orig/debian/jiv.1 +++ jasper-1.900.1/debian/jiv.1 @@ -0,0 +1,24 @@ +.TH jiv 1 "20 June 2004" "Version 1.701.0" "JasPer Manual" + +.SH NAME +jiv \- Image display utility + +.SH SYNOPSIS +.B jiv +.RI [ options ] +.RI [ file ... ] + +.SH DESCRIPTION +The +.B jiv +command displays a JPEG-2000 image on an X display. Use the arrow keys for +scrolling and < and > for zooming. Please use the \-\-help command line switch +and the JasPer Software Reference Manual for more information. + +.SH SEE ALSO +.IR jasper (1) + +.SH AUTHOR +Michael D. Adams +This manpage was initially written by Roland Stigge for +the Debian Project. --- jasper-1.900.1.orig/debian/libjasper-runtime.install +++ jasper-1.900.1/debian/libjasper-runtime.install @@ -0,0 +1,4 @@ +debian/tmp/usr/bin/imgcmp +debian/tmp/usr/bin/imginfo +debian/tmp/usr/bin/jasper +debian/tmp/usr/bin/jiv --- jasper-1.900.1.orig/debian/rules +++ jasper-1.900.1/debian/rules @@ -0,0 +1,108 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. +# GNU copyright 1997 to 1999 by Joey Hess. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +include /usr/share/dpatch/dpatch.make + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL_PROGRAM += -s +endif + + +config.status: configure patch + dh_testdir + # Add here commands to configure the package. + ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --enable-shared=yes + + +build: build-stamp +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + + touch build-stamp + +clean-patched: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + [ ! -f Makefile ] || $(MAKE) distclean +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + + + dh_clean + +clean: clean-patched unpatch + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/tmp + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs + #ChangeLog + dh_installdocs + dh_installexamples + dh_install --list-missing +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip + dh_compress -X.pdf + dh_fixperms +# dh_perl +# d_python + dh_makeshlibs -V + dh_installdeb + dh_shlibdeps -ldebian/libjasper1/usr/lib + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- jasper-1.900.1.orig/debian/libjasper-runtime.manpages +++ jasper-1.900.1/debian/libjasper-runtime.manpages @@ -0,0 +1,4 @@ +debian/jasper.1 +debian/jiv.1 +debian/imgcmp.1 +debian/imginfo.1 --- jasper-1.900.1.orig/debian/imginfo.1 +++ jasper-1.900.1/debian/imginfo.1 @@ -0,0 +1,23 @@ +.TH imginfo 1 "20 June 2004" "Version 1.701.0" "JasPer Manual" + +.SH NAME +imginfo \- Image information utility + +.SH SYNOPSIS +.B imginfo +.RI [ options ] + +.SH DESCRIPTION +The +.B imginfo +command displays information about an image. +Please use the \-\-help command +line switch and the JasPer Software Reference Manual for more information. + +.SH SEE ALSO +.IR jasper (1) + +.SH AUTHOR +Michael D. Adams +This manpage was initially written by Roland Stigge for +the Debian Project. --- jasper-1.900.1.orig/debian/imgcmp.1 +++ jasper-1.900.1/debian/imgcmp.1 @@ -0,0 +1,24 @@ +.TH imgcmp 1 "20 June 2004" "Version 1.701.0" "JasPer Manual" + +.SH NAME +imgcmp \- Image comparison utility + +.SH SYNOPSIS +.B imgcmp +.RI [ options ] + +.SH DESCRIPTION +The +.B imgcmp +command compares two images of the same geometry with respect to a given +metric. +Please use the \-\-help command +line switch and the JasPer Software Reference Manual for more information. + +.SH SEE ALSO +.IR jasper (1) + +.SH AUTHOR +Michael D. Adams +This manpage was initially written by Roland Stigge for +the Debian Project. --- jasper-1.900.1.orig/debian/compat +++ jasper-1.900.1/debian/compat @@ -0,0 +1 @@ +4 --- jasper-1.900.1.orig/debian/libjasper-dev.docs +++ jasper-1.900.1/debian/libjasper-dev.docs @@ -0,0 +1,3 @@ +doc/jasper.pdf +doc/jpeg2000.pdf +NEWS --- jasper-1.900.1.orig/debian/libjasper1.install +++ jasper-1.900.1/debian/libjasper1.install @@ -0,0 +1 @@ +debian/tmp/usr/lib/libjasper.so.* --- jasper-1.900.1.orig/debian/patches/01_uuid.dpatch +++ jasper-1.900.1/debian/patches/01_uuid.dpatch @@ -0,0 +1,242 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 01_uuid.dpatch by Andrey Kiselev +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: GeoJP2 uuid patch + +@DPATCH@ + +diff -urN jasper-1.900.1/src/libjasper/jp2/jp2_cod.c jasper-1.900.1.uuid/src/libjasper/jp2/jp2_cod.c +--- jasper-1.900.1/src/libjasper/jp2/jp2_cod.c 2007-01-19 22:43:05.000000000 +0100 ++++ jasper-1.900.1.uuid/src/libjasper/jp2/jp2_cod.c 2007-03-06 14:49:58.000000000 +0100 +@@ -5,6 +5,11 @@ + * All rights reserved. + */ + ++/* ++ * Modified by Andrey Kiselev to properly handle UUID ++ * box. ++ */ ++ + /* __START_OF_JASPER_LICENSE__ + * + * JasPer License Version 2.0 +@@ -127,6 +132,9 @@ + static int jp2_pclr_getdata(jp2_box_t *box, jas_stream_t *in); + static int jp2_pclr_putdata(jp2_box_t *box, jas_stream_t *out); + static void jp2_pclr_dumpdata(jp2_box_t *box, FILE *out); ++static void jp2_uuid_destroy(jp2_box_t *box); ++static int jp2_uuid_getdata(jp2_box_t *box, jas_stream_t *in); ++static int jp2_uuid_putdata(jp2_box_t *box, jas_stream_t *out); + + /******************************************************************************\ + * Local data. +@@ -164,7 +172,7 @@ + {JP2_BOX_XML, "XML", 0, + {0, 0, 0, 0, 0}}, + {JP2_BOX_UUID, "UUID", 0, +- {0, 0, 0, 0, 0}}, ++ {0, jp2_uuid_destroy, jp2_uuid_getdata, jp2_uuid_putdata, 0}}, + {JP2_BOX_UINF, "UINF", JP2_BOX_SUPER, + {0, 0, 0, 0, 0}}, + {JP2_BOX_ULST, "ULST", 0, +@@ -271,7 +279,7 @@ + } else { + box->datalen = box->len - JP2_BOX_HDRLEN(false); + } +- if (box->len != 0 && box->len < 8) { ++ if (box->len != 0 && box->len < JP2_BOX_HDRLEN(false)) { + goto error; + } + +@@ -876,6 +884,56 @@ + } + } + ++static void jp2_uuid_destroy(jp2_box_t *box) ++{ ++ jp2_uuid_t *uuid = &box->data.uuid; ++ if (uuid->data) ++ { ++ jas_free(uuid->data); ++ uuid->data = NULL; ++ } ++} ++ ++static int jp2_uuid_getdata(jp2_box_t *box, jas_stream_t *in) ++{ ++ jp2_uuid_t *uuid = &box->data.uuid; ++ int i; ++ ++ for (i = 0; i < 16; i++) ++ { ++ if (jp2_getuint8(in, &uuid->uuid[i])) ++ return -1; ++ } ++ ++ uuid->datalen = box->datalen - 16; ++ uuid->data = jas_malloc(uuid->datalen * sizeof(uint_fast8_t)); ++ for (i = 0; i < uuid->datalen; i++) ++ { ++ if (jp2_getuint8(in, &uuid->data[i])) ++ return -1; ++ } ++ return 0; ++} ++ ++static int jp2_uuid_putdata(jp2_box_t *box, jas_stream_t *out) ++{ ++ jp2_uuid_t *uuid = &box->data.uuid; ++ int i; ++ ++ for (i = 0; i < 16; i++) ++ { ++ if (jp2_putuint8(out, uuid->uuid[i])) ++ return -1; ++ } ++ ++ for (i = 0; i < uuid->datalen; i++) ++ { ++ if (jp2_putuint8(out, uuid->data[i])) ++ return -1; ++ } ++ return 0; ++} ++ + static int jp2_getint(jas_stream_t *in, int s, int n, int_fast32_t *val) + { + int c; +diff -urN jasper-1.900.1/src/libjasper/jp2/jp2_cod.h jasper-1.900.1.uuid/src/libjasper/jp2/jp2_cod.h +--- jasper-1.900.1/src/libjasper/jp2/jp2_cod.h 2007-01-19 22:43:05.000000000 +0100 ++++ jasper-1.900.1.uuid/src/libjasper/jp2/jp2_cod.h 2007-03-06 14:49:58.000000000 +0100 +@@ -5,6 +5,11 @@ + * All rights reserved. + */ + ++/* ++ * Modified by Andrey Kiselev to properly handle UUID ++ * box. ++ */ ++ + /* __START_OF_JASPER_LICENSE__ + * + * JasPer License Version 2.0 +@@ -229,6 +234,12 @@ + jp2_cmapent_t *ents; + } jp2_cmap_t; + ++typedef struct { ++ uint_fast32_t datalen; ++ uint_fast8_t uuid[16]; ++ uint_fast8_t *data; ++} jp2_uuid_t; ++ + #define JP2_CMAP_DIRECT 0 + #define JP2_CMAP_PALETTE 1 + +@@ -257,6 +268,7 @@ + jp2_pclr_t pclr; + jp2_cdef_t cdef; + jp2_cmap_t cmap; ++ jp2_uuid_t uuid; + } data; + + } jp2_box_t; +diff -urN jasper-1.900.1/src/libjasper/jp2/jp2_enc.c jasper-1.900.1.uuid/src/libjasper/jp2/jp2_enc.c +--- jasper-1.900.1/src/libjasper/jp2/jp2_enc.c 2007-01-19 22:43:05.000000000 +0100 ++++ jasper-1.900.1.uuid/src/libjasper/jp2/jp2_enc.c 2007-03-06 14:49:58.000000000 +0100 +@@ -5,6 +5,11 @@ + * All rights reserved. + */ + ++/* ++ * Modified by Andrey Kiselev to properly handle UUID ++ * box. ++ */ ++ + /* __START_OF_JASPER_LICENSE__ + * + * JasPer License Version 2.0 +@@ -86,7 +91,7 @@ + * Functions. + \******************************************************************************/ + +-int jp2_encode(jas_image_t *image, jas_stream_t *out, char *optstr) ++int jp2_write_header(jas_image_t *image, jas_stream_t *out) + { + jp2_box_t *box; + jp2_ftyp_t *ftyp; +@@ -97,8 +102,6 @@ + long len; + uint_fast16_t cmptno; + jp2_colr_t *colr; +- char buf[4096]; +- uint_fast32_t overhead; + jp2_cdefchan_t *cdefchanent; + jp2_cdef_t *cdef; + int i; +@@ -326,6 +329,26 @@ + jas_stream_close(tmpstream); + tmpstream = 0; + ++ return 0; ++ abort(); ++ ++error: ++ ++ if (box) { ++ jp2_box_destroy(box); ++ } ++ if (tmpstream) { ++ jas_stream_close(tmpstream); ++ } ++ return -1; ++} ++ ++int jp2_write_codestream(jas_image_t *image, jas_stream_t *out, char *optstr) ++{ ++ jp2_box_t *box; ++ char buf[4096]; ++ uint_fast32_t overhead; ++ + /* + * Output the contiguous code stream box. + */ +@@ -358,12 +381,34 @@ + if (box) { + jp2_box_destroy(box); + } +- if (tmpstream) { +- jas_stream_close(tmpstream); +- } + return -1; + } + ++int jp2_encode(jas_image_t *image, jas_stream_t *out, char *optstr) ++{ ++ if (jp2_write_header(image, out) < 0) ++ return -1; ++ if (jp2_write_codestream(image, out, optstr) < 0) ++ return -1; ++ ++ return 0; ++} ++ ++int jp2_encode_uuid(jas_image_t *image, jas_stream_t *out, ++ char *optstr, jp2_box_t *uuid) ++{ ++ if (jp2_write_header(image, out) < 0) ++ return -1; ++ if (uuid) { ++ if (jp2_box_put(uuid, out)) ++ return -1; ++ } ++ if (jp2_write_codestream(image, out, optstr) < 0) ++ return -1; ++ ++ return 0; ++} ++ + static uint_fast32_t jp2_gettypeasoc(int colorspace, int ctype) + { + int type; --- jasper-1.900.1.orig/debian/patches/00list +++ jasper-1.900.1/debian/patches/00list @@ -0,0 +1,2 @@ +01_uuid.dpatch +02_security.dpatch --- jasper-1.900.1.orig/debian/patches/02_security.dpatch +++ jasper-1.900.1/debian/patches/02_security.dpatch @@ -0,0 +1,978 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## +## All lines beginning with `## DP:' are a description of the patch. + +@DPATCH@ + +diff --git a/src/libjasper/base/jas_cm.c b/src/libjasper/base/jas_cm.c +index 77514dd..e63a6d2 100644 +--- a/src/libjasper/base/jas_cm.c ++++ b/src/libjasper/base/jas_cm.c +@@ -704,8 +704,7 @@ static int jas_cmpxformseq_resize(jas_cmpxformseq_t *pxformseq, int n) + { + jas_cmpxform_t **p; + assert(n >= pxformseq->numpxforms); +- p = (!pxformseq->pxforms) ? jas_malloc(n * sizeof(jas_cmpxform_t *)) : +- jas_realloc(pxformseq->pxforms, n * sizeof(jas_cmpxform_t *)); ++ p = jas_realloc2(pxformseq->pxforms, n, sizeof(jas_cmpxform_t *)); + if (!p) { + return -1; + } +@@ -889,13 +888,13 @@ static int jas_cmshapmatlut_set(jas_cmshapmatlut_t *lut, jas_icccurv_t *curv) + jas_cmshapmatlut_cleanup(lut); + if (curv->numents == 0) { + lut->size = 2; +- if (!(lut->data = jas_malloc(lut->size * sizeof(jas_cmreal_t)))) ++ if (!(lut->data = jas_alloc2(lut->size, sizeof(jas_cmreal_t)))) + goto error; + lut->data[0] = 0.0; + lut->data[1] = 1.0; + } else if (curv->numents == 1) { + lut->size = 256; +- if (!(lut->data = jas_malloc(lut->size * sizeof(jas_cmreal_t)))) ++ if (!(lut->data = jas_alloc2(lut->size, sizeof(jas_cmreal_t)))) + goto error; + gamma = curv->ents[0] / 256.0; + for (i = 0; i < lut->size; ++i) { +@@ -903,7 +902,7 @@ static int jas_cmshapmatlut_set(jas_cmshapmatlut_t *lut, jas_icccurv_t *curv) + } + } else { + lut->size = curv->numents; +- if (!(lut->data = jas_malloc(lut->size * sizeof(jas_cmreal_t)))) ++ if (!(lut->data = jas_alloc2(lut->size, sizeof(jas_cmreal_t)))) + goto error; + for (i = 0; i < lut->size; ++i) { + lut->data[i] = curv->ents[i] / 65535.0; +@@ -953,7 +952,7 @@ static int jas_cmshapmatlut_invert(jas_cmshapmatlut_t *invlut, + return -1; + } + } +- if (!(invlut->data = jas_malloc(n * sizeof(jas_cmreal_t)))) ++ if (!(invlut->data = jas_alloc2(n, sizeof(jas_cmreal_t)))) + return -1; + invlut->size = n; + for (i = 0; i < invlut->size; ++i) { +diff --git a/src/libjasper/base/jas_icc.c b/src/libjasper/base/jas_icc.c +index e5a0a2e..6fb2721 100644 +--- a/src/libjasper/base/jas_icc.c ++++ b/src/libjasper/base/jas_icc.c +@@ -373,7 +373,7 @@ int jas_iccprof_save(jas_iccprof_t *prof, jas_stream_t *out) + jas_icctagtab_t *tagtab; + + tagtab = &prof->tagtab; +- if (!(tagtab->ents = jas_malloc(prof->attrtab->numattrs * ++ if (!(tagtab->ents = jas_alloc2(prof->attrtab->numattrs, + sizeof(jas_icctagtabent_t)))) + goto error; + tagtab->numents = prof->attrtab->numattrs; +@@ -522,7 +522,7 @@ static int jas_iccprof_gettagtab(jas_stream_t *in, jas_icctagtab_t *tagtab) + } + if (jas_iccgetuint32(in, &tagtab->numents)) + goto error; +- if (!(tagtab->ents = jas_malloc(tagtab->numents * ++ if (!(tagtab->ents = jas_alloc2(tagtab->numents, + sizeof(jas_icctagtabent_t)))) + goto error; + tagtabent = tagtab->ents; +@@ -743,8 +743,7 @@ static int jas_iccattrtab_resize(jas_iccattrtab_t *tab, int maxents) + { + jas_iccattr_t *newattrs; + assert(maxents >= tab->numattrs); +- newattrs = tab->attrs ? jas_realloc(tab->attrs, maxents * +- sizeof(jas_iccattr_t)) : jas_malloc(maxents * sizeof(jas_iccattr_t)); ++ newattrs = jas_realloc2(tab->attrs, maxents, sizeof(jas_iccattr_t)); + if (!newattrs) + return -1; + tab->attrs = newattrs; +@@ -999,7 +998,7 @@ static int jas_icccurv_input(jas_iccattrval_t *attrval, jas_stream_t *in, + + if (jas_iccgetuint32(in, &curv->numents)) + goto error; +- if (!(curv->ents = jas_malloc(curv->numents * sizeof(jas_iccuint16_t)))) ++ if (!(curv->ents = jas_alloc2(curv->numents, sizeof(jas_iccuint16_t)))) + goto error; + for (i = 0; i < curv->numents; ++i) { + if (jas_iccgetuint16(in, &curv->ents[i])) +@@ -1100,7 +1099,7 @@ static int jas_icctxtdesc_input(jas_iccattrval_t *attrval, jas_stream_t *in, + if (jas_iccgetuint32(in, &txtdesc->uclangcode) || + jas_iccgetuint32(in, &txtdesc->uclen)) + goto error; +- if (!(txtdesc->ucdata = jas_malloc(txtdesc->uclen * 2))) ++ if (!(txtdesc->ucdata = jas_alloc2(txtdesc->uclen, 2))) + goto error; + if (jas_stream_read(in, txtdesc->ucdata, txtdesc->uclen * 2) != + JAS_CAST(int, txtdesc->uclen * 2)) +@@ -1292,17 +1291,17 @@ static int jas_icclut8_input(jas_iccattrval_t *attrval, jas_stream_t *in, + jas_iccgetuint16(in, &lut8->numouttabents)) + goto error; + clutsize = jas_iccpowi(lut8->clutlen, lut8->numinchans) * lut8->numoutchans; +- if (!(lut8->clut = jas_malloc(clutsize * sizeof(jas_iccuint8_t))) || +- !(lut8->intabsbuf = jas_malloc(lut8->numinchans * +- lut8->numintabents * sizeof(jas_iccuint8_t))) || +- !(lut8->intabs = jas_malloc(lut8->numinchans * ++ if (!(lut8->clut = jas_alloc2(clutsize, sizeof(jas_iccuint8_t))) || ++ !(lut8->intabsbuf = jas_alloc3(lut8->numinchans, ++ lut8->numintabents, sizeof(jas_iccuint8_t))) || ++ !(lut8->intabs = jas_alloc2(lut8->numinchans, + sizeof(jas_iccuint8_t *)))) + goto error; + for (i = 0; i < lut8->numinchans; ++i) + lut8->intabs[i] = &lut8->intabsbuf[i * lut8->numintabents]; +- if (!(lut8->outtabsbuf = jas_malloc(lut8->numoutchans * +- lut8->numouttabents * sizeof(jas_iccuint8_t))) || +- !(lut8->outtabs = jas_malloc(lut8->numoutchans * ++ if (!(lut8->outtabsbuf = jas_alloc3(lut8->numoutchans, ++ lut8->numouttabents, sizeof(jas_iccuint8_t))) || ++ !(lut8->outtabs = jas_alloc2(lut8->numoutchans, + sizeof(jas_iccuint8_t *)))) + goto error; + for (i = 0; i < lut8->numoutchans; ++i) +@@ -1461,17 +1460,17 @@ static int jas_icclut16_input(jas_iccattrval_t *attrval, jas_stream_t *in, + jas_iccgetuint16(in, &lut16->numouttabents)) + goto error; + clutsize = jas_iccpowi(lut16->clutlen, lut16->numinchans) * lut16->numoutchans; +- if (!(lut16->clut = jas_malloc(clutsize * sizeof(jas_iccuint16_t))) || +- !(lut16->intabsbuf = jas_malloc(lut16->numinchans * +- lut16->numintabents * sizeof(jas_iccuint16_t))) || +- !(lut16->intabs = jas_malloc(lut16->numinchans * ++ if (!(lut16->clut = jas_alloc2(clutsize, sizeof(jas_iccuint16_t))) || ++ !(lut16->intabsbuf = jas_alloc3(lut16->numinchans, ++ lut16->numintabents, sizeof(jas_iccuint16_t))) || ++ !(lut16->intabs = jas_alloc2(lut16->numinchans, + sizeof(jas_iccuint16_t *)))) + goto error; + for (i = 0; i < lut16->numinchans; ++i) + lut16->intabs[i] = &lut16->intabsbuf[i * lut16->numintabents]; +- if (!(lut16->outtabsbuf = jas_malloc(lut16->numoutchans * +- lut16->numouttabents * sizeof(jas_iccuint16_t))) || +- !(lut16->outtabs = jas_malloc(lut16->numoutchans * ++ if (!(lut16->outtabsbuf = jas_alloc3(lut16->numoutchans, ++ lut16->numouttabents, sizeof(jas_iccuint16_t))) || ++ !(lut16->outtabs = jas_alloc2(lut16->numoutchans, + sizeof(jas_iccuint16_t *)))) + goto error; + for (i = 0; i < lut16->numoutchans; ++i) +diff --git a/src/libjasper/base/jas_image.c b/src/libjasper/base/jas_image.c +index 876debb..c09974b 100644 +--- a/src/libjasper/base/jas_image.c ++++ b/src/libjasper/base/jas_image.c +@@ -142,7 +142,7 @@ jas_image_t *jas_image_create(int numcmpts, jas_image_cmptparm_t *cmptparms, + image->inmem_ = true; + + /* Allocate memory for the per-component information. */ +- if (!(image->cmpts_ = jas_malloc(image->maxcmpts_ * ++ if (!(image->cmpts_ = jas_alloc2(image->maxcmpts_, + sizeof(jas_image_cmpt_t *)))) { + jas_image_destroy(image); + return 0; +@@ -774,8 +774,7 @@ static int jas_image_growcmpts(jas_image_t *image, int maxcmpts) + jas_image_cmpt_t **newcmpts; + int cmptno; + +- newcmpts = (!image->cmpts_) ? jas_malloc(maxcmpts * sizeof(jas_image_cmpt_t *)) : +- jas_realloc(image->cmpts_, maxcmpts * sizeof(jas_image_cmpt_t *)); ++ newcmpts = jas_realloc2(image->cmpts_, maxcmpts, sizeof(jas_image_cmpt_t *)); + if (!newcmpts) { + return -1; + } +diff --git a/src/libjasper/base/jas_malloc.c b/src/libjasper/base/jas_malloc.c +index 13f7bc8..90658e8 100644 +--- a/src/libjasper/base/jas_malloc.c ++++ b/src/libjasper/base/jas_malloc.c +@@ -76,6 +76,9 @@ + + /* We need the prototype for memset. */ + #include ++#include ++#include ++#include + + #include "jasper/jas_malloc.h" + +@@ -113,18 +116,50 @@ void jas_free(void *ptr) + + void *jas_realloc(void *ptr, size_t size) + { +- return realloc(ptr, size); ++ return ptr ? realloc(ptr, size) : malloc(size); + } + +-void *jas_calloc(size_t nmemb, size_t size) ++void *jas_realloc2(void *ptr, size_t nmemb, size_t size) ++{ ++ if (!ptr) ++ return jas_alloc2(nmemb, size); ++ if (nmemb && SIZE_MAX / nmemb < size) { ++ errno = ENOMEM; ++ return NULL; ++ } ++ return jas_realloc(ptr, nmemb * size); ++ ++} ++ ++void *jas_alloc2(size_t nmemb, size_t size) ++{ ++ if (nmemb && SIZE_MAX / nmemb < size) { ++ errno = ENOMEM; ++ return NULL; ++ } ++ ++ return jas_malloc(nmemb * size); ++} ++ ++void *jas_alloc3(size_t a, size_t b, size_t c) + { +- void *ptr; + size_t n; +- n = nmemb * size; +- if (!(ptr = jas_malloc(n * sizeof(char)))) { +- return 0; ++ ++ if (a && SIZE_MAX / a < b) { ++ errno = ENOMEM; ++ return NULL; + } +- memset(ptr, 0, n); ++ ++ return jas_alloc2(a*b, c); ++} ++ ++void *jas_calloc(size_t nmemb, size_t size) ++{ ++ void *ptr; ++ ++ ptr = jas_alloc2(nmemb, size); ++ if (ptr) ++ memset(ptr, 0, nmemb*size); + return ptr; + } + +diff --git a/src/libjasper/base/jas_seq.c b/src/libjasper/base/jas_seq.c +index 16e1778..672b60f 100644 +--- a/src/libjasper/base/jas_seq.c ++++ b/src/libjasper/base/jas_seq.c +@@ -114,7 +114,7 @@ jas_matrix_t *jas_matrix_create(int numrows, int numcols) + matrix->datasize_ = numrows * numcols; + + if (matrix->maxrows_ > 0) { +- if (!(matrix->rows_ = jas_malloc(matrix->maxrows_ * ++ if (!(matrix->rows_ = jas_alloc2(matrix->maxrows_, + sizeof(jas_seqent_t *)))) { + jas_matrix_destroy(matrix); + return 0; +@@ -122,7 +122,7 @@ jas_matrix_t *jas_matrix_create(int numrows, int numcols) + } + + if (matrix->datasize_ > 0) { +- if (!(matrix->data_ = jas_malloc(matrix->datasize_ * ++ if (!(matrix->data_ = jas_alloc2(matrix->datasize_, + sizeof(jas_seqent_t)))) { + jas_matrix_destroy(matrix); + return 0; +@@ -220,7 +220,7 @@ void jas_matrix_bindsub(jas_matrix_t *mat0, jas_matrix_t *mat1, int r0, int c0, + mat0->numrows_ = r1 - r0 + 1; + mat0->numcols_ = c1 - c0 + 1; + mat0->maxrows_ = mat0->numrows_; +- mat0->rows_ = jas_malloc(mat0->maxrows_ * sizeof(jas_seqent_t *)); ++ mat0->rows_ = jas_alloc2(mat0->maxrows_, sizeof(jas_seqent_t *)); + for (i = 0; i < mat0->numrows_; ++i) { + mat0->rows_[i] = mat1->rows_[r0 + i] + c0; + } +diff --git a/src/libjasper/base/jas_stream.c b/src/libjasper/base/jas_stream.c +index 9a88556..61fcc64 100644 +--- a/src/libjasper/base/jas_stream.c ++++ b/src/libjasper/base/jas_stream.c +@@ -212,7 +212,7 @@ jas_stream_t *jas_stream_memopen(char *buf, int bufsize) + if (buf) { + obj->buf_ = (unsigned char *) buf; + } else { +- obj->buf_ = jas_malloc(obj->bufsize_ * sizeof(char)); ++ obj->buf_ = jas_malloc(obj->bufsize_); + obj->myalloc_ = 1; + } + if (!obj->buf_) { +@@ -361,28 +361,22 @@ jas_stream_t *jas_stream_tmpfile() + } + obj->fd = -1; + obj->flags = 0; +- obj->pathname[0] = '\0'; + stream->obj_ = obj; + + /* Choose a file name. */ +- tmpnam(obj->pathname); ++ snprintf(obj->pathname, L_tmpnam, "%stmp.XXXXXXXXXX", P_tmpdir); + + /* Open the underlying file. */ +- if ((obj->fd = open(obj->pathname, O_CREAT | O_EXCL | O_RDWR | O_TRUNC | O_BINARY, +- JAS_STREAM_PERMS)) < 0) { ++ if ((obj->fd = mkstemp(obj->pathname)) < 0) { + jas_stream_destroy(stream); + return 0; + } + + /* Unlink the file so that it will disappear if the program + terminates abnormally. */ +- /* Under UNIX, one can unlink an open file and continue to do I/O +- on it. Not all operating systems support this functionality, however. +- For example, under Microsoft Windows the unlink operation will fail, +- since the file is open. */ + if (unlink(obj->pathname)) { +- /* We will try unlinking the file again after it is closed. */ +- obj->flags |= JAS_STREAM_FILEOBJ_DELONCLOSE; ++ jas_stream_destroy(stream); ++ return 0; + } + + /* Use full buffering. */ +@@ -553,7 +547,7 @@ int jas_stream_printf(jas_stream_t *stream, const char *fmt, ...) + int ret; + + va_start(ap, fmt); +- ret = vsprintf(buf, fmt, ap); ++ ret = vsnprintf(buf, sizeof buf, fmt, ap); + jas_stream_puts(stream, buf); + va_end(ap); + return ret; +@@ -992,7 +986,7 @@ static int mem_resize(jas_stream_memobj_t *m, int bufsize) + unsigned char *buf; + + assert(m->buf_); +- if (!(buf = jas_realloc(m->buf_, bufsize * sizeof(unsigned char)))) { ++ if (!(buf = jas_realloc(m->buf_, bufsize))) { + return -1; + } + m->buf_ = buf; +diff --git a/src/libjasper/bmp/bmp_dec.c b/src/libjasper/bmp/bmp_dec.c +index 4cb0df3..7a6dcb1 100644 +--- a/src/libjasper/bmp/bmp_dec.c ++++ b/src/libjasper/bmp/bmp_dec.c +@@ -283,7 +283,7 @@ static bmp_info_t *bmp_getinfo(jas_stream_t *in) + } + + if (info->numcolors > 0) { +- if (!(info->palents = jas_malloc(info->numcolors * ++ if (!(info->palents = jas_alloc2(info->numcolors, + sizeof(bmp_palent_t)))) { + bmp_info_destroy(info); + return 0; +diff --git a/src/libjasper/include/jasper/jas_malloc.h b/src/libjasper/include/jasper/jas_malloc.h +index f2a8f8b..258e4c7 100644 +--- a/src/libjasper/include/jasper/jas_malloc.h ++++ b/src/libjasper/include/jasper/jas_malloc.h +@@ -95,6 +95,9 @@ extern "C" { + #define jas_free MEMFREE + #define jas_realloc MEMREALLOC + #define jas_calloc MEMCALLOC ++#define jas_alloc2(a, b) MEMALLOC((a)*(b)) ++#define jas_alloc3(a, b, c) MEMALLOC((a)*(b)*(c)) ++#define jas_realloc2(p, a, b) MEMREALLOC((p), (a)*(b)) + #endif + + /******************************************************************************\ +@@ -115,6 +118,12 @@ void *jas_realloc(void *ptr, size_t size); + /* Allocate a block of memory and initialize the contents to zero. */ + void *jas_calloc(size_t nmemb, size_t size); + ++/* size-checked double allocation .*/ ++void *jas_alloc2(size_t, size_t); ++ ++void *jas_alloc3(size_t, size_t, size_t); ++ ++void *jas_realloc2(void *, size_t, size_t); + #endif + + #ifdef __cplusplus +diff --git a/src/libjasper/jp2/jp2_cod.c b/src/libjasper/jp2/jp2_cod.c +index d0bf058..8edf453 100644 +--- a/src/libjasper/jp2/jp2_cod.c ++++ b/src/libjasper/jp2/jp2_cod.c +@@ -380,7 +380,7 @@ static int jp2_bpcc_getdata(jp2_box_t *box, jas_stream_t *in) + jp2_bpcc_t *bpcc = &box->data.bpcc; + unsigned int i; + bpcc->numcmpts = box->datalen; +- if (!(bpcc->bpcs = jas_malloc(bpcc->numcmpts * sizeof(uint_fast8_t)))) { ++ if (!(bpcc->bpcs = jas_alloc2(bpcc->numcmpts, sizeof(uint_fast8_t)))) { + return -1; + } + for (i = 0; i < bpcc->numcmpts; ++i) { +@@ -424,7 +424,7 @@ static int jp2_colr_getdata(jp2_box_t *box, jas_stream_t *in) + break; + case JP2_COLR_ICC: + colr->iccplen = box->datalen - 3; +- if (!(colr->iccp = jas_malloc(colr->iccplen * sizeof(uint_fast8_t)))) { ++ if (!(colr->iccp = jas_alloc2(colr->iccplen, sizeof(uint_fast8_t)))) { + return -1; + } + if (jas_stream_read(in, colr->iccp, colr->iccplen) != colr->iccplen) { +@@ -461,7 +461,7 @@ static int jp2_cdef_getdata(jp2_box_t *box, jas_stream_t *in) + if (jp2_getuint16(in, &cdef->numchans)) { + return -1; + } +- if (!(cdef->ents = jas_malloc(cdef->numchans * sizeof(jp2_cdefchan_t)))) { ++ if (!(cdef->ents = jas_alloc2(cdef->numchans, sizeof(jp2_cdefchan_t)))) { + return -1; + } + for (channo = 0; channo < cdef->numchans; ++channo) { +@@ -774,7 +774,7 @@ static int jp2_cmap_getdata(jp2_box_t *box, jas_stream_t *in) + unsigned int i; + + cmap->numchans = (box->datalen) / 4; +- if (!(cmap->ents = jas_malloc(cmap->numchans * sizeof(jp2_cmapent_t)))) { ++ if (!(cmap->ents = jas_alloc2(cmap->numchans, sizeof(jp2_cmapent_t)))) { + return -1; + } + for (i = 0; i < cmap->numchans; ++i) { +@@ -836,10 +836,10 @@ static int jp2_pclr_getdata(jp2_box_t *box, jas_stream_t *in) + return -1; + } + lutsize = pclr->numlutents * pclr->numchans; +- if (!(pclr->lutdata = jas_malloc(lutsize * sizeof(int_fast32_t)))) { ++ if (!(pclr->lutdata = jas_alloc2(lutsize, sizeof(int_fast32_t)))) { + return -1; + } +- if (!(pclr->bpc = jas_malloc(pclr->numchans * sizeof(uint_fast8_t)))) { ++ if (!(pclr->bpc = jas_alloc2(pclr->numchans, sizeof(uint_fast8_t)))) { + return -1; + } + for (i = 0; i < pclr->numchans; ++i) { +diff --git a/src/libjasper/jp2/jp2_dec.c b/src/libjasper/jp2/jp2_dec.c +index 65772de..5f7be7e 100644 +--- a/src/libjasper/jp2/jp2_dec.c ++++ b/src/libjasper/jp2/jp2_dec.c +@@ -336,7 +336,7 @@ jas_image_t *jp2_decode(jas_stream_t *in, char *optstr) + } + + /* Allocate space for the channel-number to component-number LUT. */ +- if (!(dec->chantocmptlut = jas_malloc(dec->numchans * sizeof(uint_fast16_t)))) { ++ if (!(dec->chantocmptlut = jas_alloc2(dec->numchans, sizeof(uint_fast16_t)))) { + jas_eprintf("error: no memory\n"); + goto error; + } +@@ -354,7 +354,7 @@ jas_image_t *jp2_decode(jas_stream_t *in, char *optstr) + if (cmapent->map == JP2_CMAP_DIRECT) { + dec->chantocmptlut[channo] = channo; + } else if (cmapent->map == JP2_CMAP_PALETTE) { +- lutents = jas_malloc(pclrd->numlutents * sizeof(int_fast32_t)); ++ lutents = jas_alloc2(pclrd->numlutents, sizeof(int_fast32_t)); + for (i = 0; i < pclrd->numlutents; ++i) { + lutents[i] = pclrd->lutdata[cmapent->pcol + i * pclrd->numchans]; + } +diff --git a/src/libjasper/jp2/jp2_enc.c b/src/libjasper/jp2/jp2_enc.c +index d41392f..b837612 100644 +--- a/src/libjasper/jp2/jp2_enc.c ++++ b/src/libjasper/jp2/jp2_enc.c +@@ -194,7 +194,7 @@ int sgnd; + } + bpcc = &box->data.bpcc; + bpcc->numcmpts = jas_image_numcmpts(image); +- if (!(bpcc->bpcs = jas_malloc(bpcc->numcmpts * ++ if (!(bpcc->bpcs = jas_alloc2(bpcc->numcmpts, + sizeof(uint_fast8_t)))) { + goto error; + } +@@ -288,7 +288,7 @@ int sgnd; + } + cdef = &box->data.cdef; + cdef->numchans = jas_image_numcmpts(image); +- cdef->ents = jas_malloc(cdef->numchans * sizeof(jp2_cdefchan_t)); ++ cdef->ents = jas_alloc2(cdef->numchans, sizeof(jp2_cdefchan_t)); + for (i = 0; i < jas_image_numcmpts(image); ++i) { + cdefchanent = &cdef->ents[i]; + cdefchanent->channo = i; +diff --git a/src/libjasper/jpc/jpc_cs.c b/src/libjasper/jpc/jpc_cs.c +index f076571..d1fe721 100644 +--- a/src/libjasper/jpc/jpc_cs.c ++++ b/src/libjasper/jpc/jpc_cs.c +@@ -502,7 +502,7 @@ static int jpc_siz_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, + !siz->tileheight || !siz->numcomps) { + return -1; + } +- if (!(siz->comps = jas_malloc(siz->numcomps * sizeof(jpc_sizcomp_t)))) { ++ if (!(siz->comps = jas_alloc2(siz->numcomps, sizeof(jpc_sizcomp_t)))) { + return -1; + } + for (i = 0; i < siz->numcomps; ++i) { +@@ -1091,7 +1091,7 @@ static int jpc_ppm_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, jas_stream_t *in + + ppm->len = ms->len - 1; + if (ppm->len > 0) { +- if (!(ppm->data = jas_malloc(ppm->len * sizeof(unsigned char)))) { ++ if (!(ppm->data = jas_malloc(ppm->len))) { + goto error; + } + if (JAS_CAST(uint, jas_stream_read(in, ppm->data, ppm->len)) != ppm->len) { +@@ -1160,7 +1160,7 @@ static int jpc_ppt_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, jas_stream_t *in + } + ppt->len = ms->len - 1; + if (ppt->len > 0) { +- if (!(ppt->data = jas_malloc(ppt->len * sizeof(unsigned char)))) { ++ if (!(ppt->data = jas_malloc(ppt->len))) { + goto error; + } + if (jas_stream_read(in, (char *) ppt->data, ppt->len) != JAS_CAST(int, ppt->len)) { +@@ -1223,7 +1223,7 @@ static int jpc_poc_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, jas_stream_t *in + uint_fast8_t tmp; + poc->numpchgs = (cstate->numcomps > 256) ? (ms->len / 9) : + (ms->len / 7); +- if (!(poc->pchgs = jas_malloc(poc->numpchgs * sizeof(jpc_pocpchg_t)))) { ++ if (!(poc->pchgs = jas_alloc2(poc->numpchgs, sizeof(jpc_pocpchg_t)))) { + goto error; + } + for (pchgno = 0, pchg = poc->pchgs; pchgno < poc->numpchgs; ++pchgno, +@@ -1328,7 +1328,7 @@ static int jpc_crg_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, jas_stream_t *in + jpc_crgcomp_t *comp; + uint_fast16_t compno; + crg->numcomps = cstate->numcomps; +- if (!(crg->comps = jas_malloc(cstate->numcomps * sizeof(uint_fast16_t)))) { ++ if (!(crg->comps = jas_alloc2(cstate->numcomps, sizeof(uint_fast16_t)))) { + return -1; + } + for (compno = 0, comp = crg->comps; compno < cstate->numcomps; +@@ -1467,7 +1467,7 @@ static int jpc_unk_getparms(jpc_ms_t *ms, jpc_cstate_t *cstate, jas_stream_t *in + cstate = 0; + + if (ms->len > 0) { +- if (!(unk->data = jas_malloc(ms->len * sizeof(unsigned char)))) { ++ if (!(unk->data = jas_malloc(ms->len))) { + return -1; + } + if (jas_stream_read(in, (char *) unk->data, ms->len) != JAS_CAST(int, ms->len)) { +diff --git a/src/libjasper/jpc/jpc_dec.c b/src/libjasper/jpc/jpc_dec.c +index fa72a0e..b1ea056 100644 +--- a/src/libjasper/jpc/jpc_dec.c ++++ b/src/libjasper/jpc/jpc_dec.c +@@ -449,7 +449,7 @@ static int jpc_dec_process_sot(jpc_dec_t *dec, jpc_ms_t *ms) + + if (dec->state == JPC_MH) { + +- compinfos = jas_malloc(dec->numcomps * sizeof(jas_image_cmptparm_t)); ++ compinfos = jas_alloc2(dec->numcomps, sizeof(jas_image_cmptparm_t)); + assert(compinfos); + for (cmptno = 0, cmpt = dec->cmpts, compinfo = compinfos; + cmptno < dec->numcomps; ++cmptno, ++cmpt, ++compinfo) { +@@ -692,7 +692,7 @@ static int jpc_dec_tileinit(jpc_dec_t *dec, jpc_dec_tile_t *tile) + tile->realmode = 1; + } + tcomp->numrlvls = ccp->numrlvls; +- if (!(tcomp->rlvls = jas_malloc(tcomp->numrlvls * ++ if (!(tcomp->rlvls = jas_alloc2(tcomp->numrlvls, + sizeof(jpc_dec_rlvl_t)))) { + return -1; + } +@@ -764,7 +764,7 @@ rlvl->bands = 0; + rlvl->cbgheightexpn); + + rlvl->numbands = (!rlvlno) ? 1 : 3; +- if (!(rlvl->bands = jas_malloc(rlvl->numbands * ++ if (!(rlvl->bands = jas_alloc2(rlvl->numbands, + sizeof(jpc_dec_band_t)))) { + return -1; + } +@@ -797,7 +797,7 @@ rlvl->bands = 0; + + assert(rlvl->numprcs); + +- if (!(band->prcs = jas_malloc(rlvl->numprcs * sizeof(jpc_dec_prc_t)))) { ++ if (!(band->prcs = jas_alloc2(rlvl->numprcs, sizeof(jpc_dec_prc_t)))) { + return -1; + } + +@@ -834,7 +834,7 @@ rlvl->bands = 0; + if (!(prc->numimsbstagtree = jpc_tagtree_create(prc->numhcblks, prc->numvcblks))) { + return -1; + } +- if (!(prc->cblks = jas_malloc(prc->numcblks * sizeof(jpc_dec_cblk_t)))) { ++ if (!(prc->cblks = jas_alloc2(prc->numcblks, sizeof(jpc_dec_cblk_t)))) { + return -1; + } + +@@ -1181,7 +1181,7 @@ static int jpc_dec_process_siz(jpc_dec_t *dec, jpc_ms_t *ms) + return -1; + } + +- if (!(dec->cmpts = jas_malloc(dec->numcomps * sizeof(jpc_dec_cmpt_t)))) { ++ if (!(dec->cmpts = jas_alloc2(dec->numcomps, sizeof(jpc_dec_cmpt_t)))) { + return -1; + } + +@@ -1204,7 +1204,7 @@ static int jpc_dec_process_siz(jpc_dec_t *dec, jpc_ms_t *ms) + dec->numhtiles = JPC_CEILDIV(dec->xend - dec->tilexoff, dec->tilewidth); + dec->numvtiles = JPC_CEILDIV(dec->yend - dec->tileyoff, dec->tileheight); + dec->numtiles = dec->numhtiles * dec->numvtiles; +- if (!(dec->tiles = jas_malloc(dec->numtiles * sizeof(jpc_dec_tile_t)))) { ++ if (!(dec->tiles = jas_alloc2(dec->numtiles, sizeof(jpc_dec_tile_t)))) { + return -1; + } + +@@ -1228,7 +1228,7 @@ static int jpc_dec_process_siz(jpc_dec_t *dec, jpc_ms_t *ms) + tile->pkthdrstreampos = 0; + tile->pptstab = 0; + tile->cp = 0; +- if (!(tile->tcomps = jas_malloc(dec->numcomps * ++ if (!(tile->tcomps = jas_alloc2(dec->numcomps, + sizeof(jpc_dec_tcomp_t)))) { + return -1; + } +@@ -1489,7 +1489,7 @@ static jpc_dec_cp_t *jpc_dec_cp_create(uint_fast16_t numcomps) + cp->numlyrs = 0; + cp->mctid = 0; + cp->csty = 0; +- if (!(cp->ccps = jas_malloc(cp->numcomps * sizeof(jpc_dec_ccp_t)))) { ++ if (!(cp->ccps = jas_alloc2(cp->numcomps, sizeof(jpc_dec_ccp_t)))) { + return 0; + } + if (!(cp->pchglist = jpc_pchglist_create())) { +@@ -2048,7 +2048,7 @@ jpc_streamlist_t *jpc_streamlist_create() + } + streamlist->numstreams = 0; + streamlist->maxstreams = 100; +- if (!(streamlist->streams = jas_malloc(streamlist->maxstreams * ++ if (!(streamlist->streams = jas_alloc2(streamlist->maxstreams, + sizeof(jas_stream_t *)))) { + jas_free(streamlist); + return 0; +@@ -2068,8 +2068,8 @@ int jpc_streamlist_insert(jpc_streamlist_t *streamlist, int streamno, + /* Grow the array of streams if necessary. */ + if (streamlist->numstreams >= streamlist->maxstreams) { + newmaxstreams = streamlist->maxstreams + 1024; +- if (!(newstreams = jas_realloc(streamlist->streams, +- (newmaxstreams + 1024) * sizeof(jas_stream_t *)))) { ++ if (!(newstreams = jas_realloc2(streamlist->streams, ++ (newmaxstreams + 1024), sizeof(jas_stream_t *)))) { + return -1; + } + for (i = streamlist->numstreams; i < streamlist->maxstreams; ++i) { +@@ -2155,8 +2155,7 @@ int jpc_ppxstab_grow(jpc_ppxstab_t *tab, int maxents) + { + jpc_ppxstabent_t **newents; + if (tab->maxents < maxents) { +- newents = (tab->ents) ? jas_realloc(tab->ents, maxents * +- sizeof(jpc_ppxstabent_t *)) : jas_malloc(maxents * sizeof(jpc_ppxstabent_t *)); ++ newents = jas_realloc2(tab->ents, maxents, sizeof(jpc_ppxstabent_t *)); + if (!newents) { + return -1; + } +diff --git a/src/libjasper/jpc/jpc_enc.c b/src/libjasper/jpc/jpc_enc.c +index bbe1ef2..6299ead 100644 +--- a/src/libjasper/jpc/jpc_enc.c ++++ b/src/libjasper/jpc/jpc_enc.c +@@ -403,7 +403,7 @@ static jpc_enc_cp_t *cp_create(char *optstr, jas_image_t *image) + vsteplcm *= jas_image_cmptvstep(image, cmptno); + } + +- if (!(cp->ccps = jas_malloc(cp->numcmpts * sizeof(jpc_enc_ccp_t)))) { ++ if (!(cp->ccps = jas_alloc2(cp->numcmpts, sizeof(jpc_enc_ccp_t)))) { + goto error; + } + for (cmptno = 0, ccp = cp->ccps; cmptno < JAS_CAST(int, cp->numcmpts); ++cmptno, +@@ -656,7 +656,7 @@ static jpc_enc_cp_t *cp_create(char *optstr, jas_image_t *image) + + if (ilyrrates && numilyrrates > 0) { + tcp->numlyrs = numilyrrates + 1; +- if (!(tcp->ilyrrates = jas_malloc((tcp->numlyrs - 1) * ++ if (!(tcp->ilyrrates = jas_alloc2((tcp->numlyrs - 1), + sizeof(jpc_fix_t)))) { + goto error; + } +@@ -940,7 +940,7 @@ startoff = jas_stream_getrwcount(enc->out); + siz->tilewidth = cp->tilewidth; + siz->tileheight = cp->tileheight; + siz->numcomps = cp->numcmpts; +- siz->comps = jas_malloc(siz->numcomps * sizeof(jpc_sizcomp_t)); ++ siz->comps = jas_alloc2(siz->numcomps, sizeof(jpc_sizcomp_t)); + assert(siz->comps); + for (i = 0; i < JAS_CAST(int, cp->numcmpts); ++i) { + siz->comps[i].prec = cp->ccps[i].prec; +@@ -977,7 +977,7 @@ startoff = jas_stream_getrwcount(enc->out); + return -1; + } + crg = &enc->mrk->parms.crg; +- crg->comps = jas_malloc(crg->numcomps * sizeof(jpc_crgcomp_t)); ++ crg->comps = jas_alloc2(crg->numcomps, sizeof(jpc_crgcomp_t)); + if (jpc_putms(enc->out, enc->cstate, enc->mrk)) { + jas_eprintf("cannot write CRG marker\n"); + return -1; +@@ -1955,7 +1955,7 @@ jpc_enc_tile_t *jpc_enc_tile_create(jpc_enc_cp_t *cp, jas_image_t *image, int ti + tile->mctid = cp->tcp.mctid; + + tile->numlyrs = cp->tcp.numlyrs; +- if (!(tile->lyrsizes = jas_malloc(tile->numlyrs * ++ if (!(tile->lyrsizes = jas_alloc2(tile->numlyrs, + sizeof(uint_fast32_t)))) { + goto error; + } +@@ -1964,7 +1964,7 @@ jpc_enc_tile_t *jpc_enc_tile_create(jpc_enc_cp_t *cp, jas_image_t *image, int ti + } + + /* Allocate an array for the per-tile-component information. */ +- if (!(tile->tcmpts = jas_malloc(cp->numcmpts * sizeof(jpc_enc_tcmpt_t)))) { ++ if (!(tile->tcmpts = jas_alloc2(cp->numcmpts, sizeof(jpc_enc_tcmpt_t)))) { + goto error; + } + /* Initialize a few members critical for error recovery. */ +@@ -2110,7 +2110,7 @@ static jpc_enc_tcmpt_t *tcmpt_create(jpc_enc_tcmpt_t *tcmpt, jpc_enc_cp_t *cp, + jas_seq2d_ystart(tcmpt->data), jas_seq2d_xend(tcmpt->data), + jas_seq2d_yend(tcmpt->data), bandinfos); + +- if (!(tcmpt->rlvls = jas_malloc(tcmpt->numrlvls * sizeof(jpc_enc_rlvl_t)))) { ++ if (!(tcmpt->rlvls = jas_alloc2(tcmpt->numrlvls, sizeof(jpc_enc_rlvl_t)))) { + goto error; + } + for (rlvlno = 0, rlvl = tcmpt->rlvls; rlvlno < tcmpt->numrlvls; +@@ -2213,7 +2213,7 @@ static jpc_enc_rlvl_t *rlvl_create(jpc_enc_rlvl_t *rlvl, jpc_enc_cp_t *cp, + rlvl->numvprcs = JPC_FLOORDIVPOW2(brprcbry - tlprctly, rlvl->prcheightexpn); + rlvl->numprcs = rlvl->numhprcs * rlvl->numvprcs; + +- if (!(rlvl->bands = jas_malloc(rlvl->numbands * sizeof(jpc_enc_band_t)))) { ++ if (!(rlvl->bands = jas_alloc2(rlvl->numbands, sizeof(jpc_enc_band_t)))) { + goto error; + } + for (bandno = 0, band = rlvl->bands; bandno < rlvl->numbands; +@@ -2290,7 +2290,7 @@ if (bandinfo->xstart != bandinfo->xend && bandinfo->ystart != bandinfo->yend) { + band->synweight = bandinfo->synenergywt; + + if (band->data) { +- if (!(band->prcs = jas_malloc(rlvl->numprcs * sizeof(jpc_enc_prc_t)))) { ++ if (!(band->prcs = jas_alloc2(rlvl->numprcs, sizeof(jpc_enc_prc_t)))) { + goto error; + } + for (prcno = 0, prc = band->prcs; prcno < rlvl->numprcs; ++prcno, +@@ -2422,7 +2422,7 @@ if (!rlvlno) { + goto error; + } + +- if (!(prc->cblks = jas_malloc(prc->numcblks * sizeof(jpc_enc_cblk_t)))) { ++ if (!(prc->cblks = jas_alloc2(prc->numcblks, sizeof(jpc_enc_cblk_t)))) { + goto error; + } + for (cblkno = 0, cblk = prc->cblks; cblkno < prc->numcblks; +diff --git a/src/libjasper/jpc/jpc_mqdec.c b/src/libjasper/jpc/jpc_mqdec.c +index 4cc2f46..66a8581 100644 +--- a/src/libjasper/jpc/jpc_mqdec.c ++++ b/src/libjasper/jpc/jpc_mqdec.c +@@ -118,7 +118,7 @@ jpc_mqdec_t *jpc_mqdec_create(int maxctxs, jas_stream_t *in) + mqdec->in = in; + mqdec->maxctxs = maxctxs; + /* Allocate memory for the per-context state information. */ +- if (!(mqdec->ctxs = jas_malloc(mqdec->maxctxs * sizeof(jpc_mqstate_t *)))) { ++ if (!(mqdec->ctxs = jas_alloc2(mqdec->maxctxs, sizeof(jpc_mqstate_t *)))) { + goto error; + } + /* Set the current context to the first context. */ +diff --git a/src/libjasper/jpc/jpc_mqenc.c b/src/libjasper/jpc/jpc_mqenc.c +index 758b361..399581e 100644 +--- a/src/libjasper/jpc/jpc_mqenc.c ++++ b/src/libjasper/jpc/jpc_mqenc.c +@@ -197,7 +197,7 @@ jpc_mqenc_t *jpc_mqenc_create(int maxctxs, jas_stream_t *out) + mqenc->maxctxs = maxctxs; + + /* Allocate memory for the per-context state information. */ +- if (!(mqenc->ctxs = jas_malloc(mqenc->maxctxs * sizeof(jpc_mqstate_t *)))) { ++ if (!(mqenc->ctxs = jas_alloc2(mqenc->maxctxs, sizeof(jpc_mqstate_t *)))) { + goto error; + } + +diff --git a/src/libjasper/jpc/jpc_qmfb.c b/src/libjasper/jpc/jpc_qmfb.c +index 00d406d..cf3320b 100644 +--- a/src/libjasper/jpc/jpc_qmfb.c ++++ b/src/libjasper/jpc/jpc_qmfb.c +@@ -321,7 +321,7 @@ void jpc_qmfb_split_row(jpc_fix_t *a, int numcols, int parity) + #if !defined(HAVE_VLA) + /* Get a buffer. */ + if (bufsize > QMFB_SPLITBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide in this case. */ + abort(); + } +@@ -389,7 +389,7 @@ void jpc_qmfb_split_col(jpc_fix_t *a, int numrows, int stride, + #if !defined(HAVE_VLA) + /* Get a buffer. */ + if (bufsize > QMFB_SPLITBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide in this case. */ + abort(); + } +@@ -460,7 +460,7 @@ void jpc_qmfb_split_colgrp(jpc_fix_t *a, int numrows, int stride, + #if !defined(HAVE_VLA) + /* Get a buffer. */ + if (bufsize > QMFB_SPLITBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide in this case. */ + abort(); + } +@@ -549,7 +549,7 @@ void jpc_qmfb_split_colres(jpc_fix_t *a, int numrows, int numcols, + #if !defined(HAVE_VLA) + /* Get a buffer. */ + if (bufsize > QMFB_SPLITBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide in this case. */ + abort(); + } +@@ -633,7 +633,7 @@ void jpc_qmfb_join_row(jpc_fix_t *a, int numcols, int parity) + #if !defined(HAVE_VLA) + /* Allocate memory for the join buffer from the heap. */ + if (bufsize > QMFB_JOINBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide. */ + abort(); + } +@@ -698,7 +698,7 @@ void jpc_qmfb_join_col(jpc_fix_t *a, int numrows, int stride, + #if !defined(HAVE_VLA) + /* Allocate memory for the join buffer from the heap. */ + if (bufsize > QMFB_JOINBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide. */ + abort(); + } +@@ -766,7 +766,7 @@ void jpc_qmfb_join_colgrp(jpc_fix_t *a, int numrows, int stride, + #if !defined(HAVE_VLA) + /* Allocate memory for the join buffer from the heap. */ + if (bufsize > QMFB_JOINBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * JPC_QMFB_COLGRPSIZE * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc2(bufsize, JPC_QMFB_COLGRPSIZE * sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide. */ + abort(); + } +@@ -852,7 +852,7 @@ void jpc_qmfb_join_colres(jpc_fix_t *a, int numrows, int numcols, + #if !defined(HAVE_VLA) + /* Allocate memory for the join buffer from the heap. */ + if (bufsize > QMFB_JOINBUFSIZE) { +- if (!(buf = jas_malloc(bufsize * numcols * sizeof(jpc_fix_t)))) { ++ if (!(buf = jas_alloc3(bufsize, numcols, sizeof(jpc_fix_t)))) { + /* We have no choice but to commit suicide. */ + abort(); + } +diff --git a/src/libjasper/jpc/jpc_t1enc.c b/src/libjasper/jpc/jpc_t1enc.c +index 3a5acea..c8bfd21 100644 +--- a/src/libjasper/jpc/jpc_t1enc.c ++++ b/src/libjasper/jpc/jpc_t1enc.c +@@ -219,7 +219,7 @@ int jpc_enc_enccblk(jpc_enc_t *enc, jas_stream_t *out, jpc_enc_tcmpt_t *tcmpt, j + + cblk->numpasses = (cblk->numbps > 0) ? (3 * cblk->numbps - 2) : 0; + if (cblk->numpasses > 0) { +- cblk->passes = jas_malloc(cblk->numpasses * sizeof(jpc_enc_pass_t)); ++ cblk->passes = jas_alloc2(cblk->numpasses, sizeof(jpc_enc_pass_t)); + assert(cblk->passes); + } else { + cblk->passes = 0; +diff --git a/src/libjasper/jpc/jpc_t2cod.c b/src/libjasper/jpc/jpc_t2cod.c +index e734900..f3d030a 100644 +--- a/src/libjasper/jpc/jpc_t2cod.c ++++ b/src/libjasper/jpc/jpc_t2cod.c +@@ -573,7 +573,7 @@ int jpc_pchglist_insert(jpc_pchglist_t *pchglist, int pchgno, jpc_pchg_t *pchg) + } + if (pchglist->numpchgs >= pchglist->maxpchgs) { + newmaxpchgs = pchglist->maxpchgs + 128; +- if (!(newpchgs = jas_realloc(pchglist->pchgs, newmaxpchgs * sizeof(jpc_pchg_t *)))) { ++ if (!(newpchgs = jas_realloc2(pchglist->pchgs, newmaxpchgs, sizeof(jpc_pchg_t *)))) { + return -1; + } + pchglist->maxpchgs = newmaxpchgs; +diff --git a/src/libjasper/jpc/jpc_t2dec.c b/src/libjasper/jpc/jpc_t2dec.c +index 6d2cb72..8300f9b 100644 +--- a/src/libjasper/jpc/jpc_t2dec.c ++++ b/src/libjasper/jpc/jpc_t2dec.c +@@ -478,7 +478,7 @@ jpc_pi_t *jpc_dec_pi_create(jpc_dec_t *dec, jpc_dec_tile_t *tile) + return 0; + } + pi->numcomps = dec->numcomps; +- if (!(pi->picomps = jas_malloc(pi->numcomps * sizeof(jpc_picomp_t)))) { ++ if (!(pi->picomps = jas_alloc2(pi->numcomps, sizeof(jpc_picomp_t)))) { + jpc_pi_destroy(pi); + return 0; + } +@@ -490,7 +490,7 @@ jpc_pi_t *jpc_dec_pi_create(jpc_dec_t *dec, jpc_dec_tile_t *tile) + for (compno = 0, tcomp = tile->tcomps, picomp = pi->picomps; + compno < pi->numcomps; ++compno, ++tcomp, ++picomp) { + picomp->numrlvls = tcomp->numrlvls; +- if (!(picomp->pirlvls = jas_malloc(picomp->numrlvls * ++ if (!(picomp->pirlvls = jas_alloc2(picomp->numrlvls, + sizeof(jpc_pirlvl_t)))) { + jpc_pi_destroy(pi); + return 0; +@@ -503,7 +503,7 @@ jpc_pi_t *jpc_dec_pi_create(jpc_dec_t *dec, jpc_dec_tile_t *tile) + rlvlno < picomp->numrlvls; ++rlvlno, ++pirlvl, ++rlvl) { + /* XXX sizeof(long) should be sizeof different type */ + pirlvl->numprcs = rlvl->numprcs; +- if (!(pirlvl->prclyrnos = jas_malloc(pirlvl->numprcs * ++ if (!(pirlvl->prclyrnos = jas_alloc2(pirlvl->numprcs, + sizeof(long)))) { + jpc_pi_destroy(pi); + return 0; +diff --git a/src/libjasper/jpc/jpc_t2enc.c b/src/libjasper/jpc/jpc_t2enc.c +index 9358a1c..d96066f 100644 +--- a/src/libjasper/jpc/jpc_t2enc.c ++++ b/src/libjasper/jpc/jpc_t2enc.c +@@ -565,7 +565,7 @@ jpc_pi_t *jpc_enc_pi_create(jpc_enc_cp_t *cp, jpc_enc_tile_t *tile) + } + pi->pktno = -1; + pi->numcomps = cp->numcmpts; +- if (!(pi->picomps = jas_malloc(pi->numcomps * sizeof(jpc_picomp_t)))) { ++ if (!(pi->picomps = jas_alloc2(pi->numcomps, sizeof(jpc_picomp_t)))) { + jpc_pi_destroy(pi); + return 0; + } +@@ -577,7 +577,7 @@ jpc_pi_t *jpc_enc_pi_create(jpc_enc_cp_t *cp, jpc_enc_tile_t *tile) + for (compno = 0, tcomp = tile->tcmpts, picomp = pi->picomps; + compno < pi->numcomps; ++compno, ++tcomp, ++picomp) { + picomp->numrlvls = tcomp->numrlvls; +- if (!(picomp->pirlvls = jas_malloc(picomp->numrlvls * ++ if (!(picomp->pirlvls = jas_alloc2(picomp->numrlvls, + sizeof(jpc_pirlvl_t)))) { + jpc_pi_destroy(pi); + return 0; +@@ -591,7 +591,7 @@ jpc_pi_t *jpc_enc_pi_create(jpc_enc_cp_t *cp, jpc_enc_tile_t *tile) + /* XXX sizeof(long) should be sizeof different type */ + pirlvl->numprcs = rlvl->numprcs; + if (rlvl->numprcs) { +- if (!(pirlvl->prclyrnos = jas_malloc(pirlvl->numprcs * ++ if (!(pirlvl->prclyrnos = jas_alloc2(pirlvl->numprcs, + sizeof(long)))) { + jpc_pi_destroy(pi); + return 0; +diff --git a/src/libjasper/jpc/jpc_tagtree.c b/src/libjasper/jpc/jpc_tagtree.c +index 06422d3..8dce000 100644 +--- a/src/libjasper/jpc/jpc_tagtree.c ++++ b/src/libjasper/jpc/jpc_tagtree.c +@@ -125,7 +125,7 @@ jpc_tagtree_t *jpc_tagtree_create(int numleafsh, int numleafsv) + ++numlvls; + } while (n > 1); + +- if (!(tree->nodes_ = jas_malloc(tree->numnodes_ * sizeof(jpc_tagtreenode_t)))) { ++ if (!(tree->nodes_ = jas_alloc2(tree->numnodes_, sizeof(jpc_tagtreenode_t)))) { + return 0; + } + +diff --git a/src/libjasper/jpc/jpc_util.c b/src/libjasper/jpc/jpc_util.c +index f53e248..6da1b66 100644 +--- a/src/libjasper/jpc/jpc_util.c ++++ b/src/libjasper/jpc/jpc_util.c +@@ -109,7 +109,7 @@ int jpc_atoaf(char *s, int *numvalues, double **values) + } + + if (n) { +- if (!(vs = jas_malloc(n * sizeof(double)))) { ++ if (!(vs = jas_alloc2(n, sizeof(double)))) { + return -1; + } + +diff --git a/src/libjasper/mif/mif_cod.c b/src/libjasper/mif/mif_cod.c +index 17506a1..a1b29dc 100644 +--- a/src/libjasper/mif/mif_cod.c ++++ b/src/libjasper/mif/mif_cod.c +@@ -438,8 +438,7 @@ static int mif_hdr_growcmpts(mif_hdr_t *hdr, int maxcmpts) + int cmptno; + mif_cmpt_t **newcmpts; + assert(maxcmpts >= hdr->numcmpts); +- newcmpts = (!hdr->cmpts) ? jas_malloc(maxcmpts * sizeof(mif_cmpt_t *)) : +- jas_realloc(hdr->cmpts, maxcmpts * sizeof(mif_cmpt_t *)); ++ newcmpts = jas_realloc2(hdr->cmpts, maxcmpts, sizeof(mif_cmpt_t *)); + if (!newcmpts) { + return -1; + }